manual Seat Exeo owners manual page 32

text version of content this owner's manual page from owners manual to the vehicle Seat Exeo, year of production 2008 - 2013:

exeo_EN.book Seite 30 Montag, 30. August 2010 4:45 16 30 Airbag system Monitoring of airbag and belt tensioner system The relevant safety requirements must be observed when the vehicle or Both the airbag and belt tensioner systems operation is constantly monitored components of the airbag are scrapped. Specialised workshops and vehicle electronically. The warning lamp T will light every time the ignition is disposal centres are familiar with these requirements. switched on until you attach your seatbelt. The system must be checked when the warning lamp WARNING T : • does not light up when the ignition is switched on,• If repairs are not carried out by a professional, or if the airbags are used • turns off and then lights up again after the ignition is switched on,incorrectly, the risk of severe or fatal injuries is increased. The airbags may • lights up or flashes while the vehicle is moving.fail to inflate, or could inflate in the wrong circumstances. • Do not cover or stick anything on the steering wheel hub or the surface In the event of a malfunction, the warning lamp remains on continuously. of the airbag unit on the passenger side of the dash panel, and do not Have the system inspected immediately by a qualified workshop.obstruct or modify them in any way. If any of the airbags are de-activated by the Authorised Service Centre, the • It is important not to attach any objects such as cup holders or tele- indicator lights for several seconds more after the verification and will turn off phone mountings to the surfaces covering the airbag units. if there is no fault. • To clean the steering wheel or dash panel, you may use only a dry or a water-moistened cloth. Never clean the dash panel and the airbag module WARNING surface with cleaners containing solvents. Solvents cause the surface to • If there is a malfunction, the airbag and belt tensioner system cannot become porous. If the airbag triggered, plastic parts could become detached and cause injuries. properly perform its protective function. • Never attempt to repair, adjust, remove or install parts of the airbag • If a malfunction occurred, have the system checked immediately by a system. qualified workshop. Otherwise, in the event of an accident, the airbag • Any work on the airbag system or removal and installation of the airbag system and belt tensioners may not be triggered, or may not be triggered components for other repairs (such as repairs to the steering wheel) should correctly. be performed only by a qualified workshop. Qualified workshops have the necessary tools, repair information and qualified personnel. • We strongly recommend you to go to a qualified workshop for all work Repairs, maintenance and disposal of airbags on the airbag system. • Never attempt to alter the front bumper or the body. The parts of the airbag system are installed in various places in your vehicle. • The airbags provide protection for just one accident; replace them once If work is carried out on the airbag system or parts have to be removed and they have deployed. fitted on the system when performing other repair work, parts of the airbag system may be damaged. In the event of an accident this could cause the airbag to inflate incorrectly or not inflate at all.

owners manual Seat Exeo

owners manual Seat Exeo - year of production: 2008, 2009, 2010, 2011, 2012, 2013 - Seat Exeo owners manual EN