owners manual Mercedes E

all ratings: 0 average rating: 5

Engine compartment 315 X Replace cap : on the filler neck and turn Only check the coolant level when the vehicle is on a level surface and the engine clockwise. has cooled down. Ensure that the cap locks into place securely. X Turn the SmartKey to position 2 in the X ignition lock (Y page 165). Chec kt he oil level again with the oil dipstick (Y page 313). On vehicles with KEYLESS-GO, press the Start/Stop button twice (Y page 165). Further information on engine oil X Check the coolant temperature display in (Y page 386). the instrument cluster. The coolant temperature must be below 158 ‡ (70 †). Additional service products X Turn the SmartKey to position Checking coolant level 0 (Y page 165) in the ignition lock. X Slowly turn cap : half a turn counter- G WARNING clockwise to allow excess pressure to Certain components in the engine escape. compartment, such as the engine, radiator X Turn cap : further counter-clockwise and and parts of the exhaust system, can become very hot. Working in the engine compartment remove it. poses a risk of injury. If the coolant is at the level of marker bar = in the filler neck when cold, there is Where possible, let the engine cool down and care enough coolant in coolant expansion touch only the components described in the and Maintenance tank ;. following. If the coolant level is approximately 0.6 in G WARNING (1.5 cm) above marker bar = in the fuel The engine cooling system is pressurized, filler neck when warm, there is enough particularly when the engine is warm. When coolant in expansion tank ;. opening the cap, you could be scalded by hot X If necessary, add coolant that has been coolant spraying out. There is a risk of injury. tested and approved by Mercedes-Benz. Let the engine cool down before opening the X Replace cap : and turn it clockwise as far cap. Wear eye and hand protection when as it will go. opening the cap. Open the cap slowly half a turn to allow pressure to escape. For further information on coolant, see (Y page 388). Adding washer fluid to the windshield washer system G WARNING Certain components in the engine compartment, such as the engine, radiator and parts of the exhaust system, can become very hot. Working in the engine compartment poses a risk of injury. Where possible, let the engine cool down and X Park the vehicle on a level surface. touch only the components described in the following. Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders