owners manual Lexus IS

all ratings: 0 average rating: 5

316 4-5. Using the driving support systems ■The Blind Spot Monitor function is operational when ●The BSM main switch is set to on ●Vehicle speed is greater than approximately 16 km/h (10 mph). ■The Blind Spot Monitor function will detect a vehicle when ●A vehicle in an adjacent lane overtakes your vehicle. ●Another vehicle enters the detection area when it changes lanes. ■Conditions under which the Blind Spot Monitor function will not detect a vehicle The Blind Spot Monitor function is not designed to detect the following types of vehicles and/or objects: ●Small motorcycles, bicycles, pedestrians etc.* ●Vehicles traveling in the opposite direction ●Guardrails, walls, signs, parked vehicles and similar stationary objects* ●Following vehicles that are in the same lane* ●Vehicles driving 2 lanes across from your vehicle* *: Depending on conditions, detection of a vehicle and/or object may occur. ■Conditions under which the Blind Spot Monitor function may not function correctly ●The Blind Spot Monitor function may not detect vehicles correctly in the following con- ditions: • During bad weather such as heavy rain, fog, snow etc. • When ice or mud etc. is attached to the rear bumper • When driving on a road surface that is wet due to rain, standing water etc. • When there is a significant difference in speed between your vehicle and the vehicle that enters the detection area • When a vehicle is in the detection area from a stop and remains in the detection area as your vehicle accelerates • When driving up or down consecutive steeinclinp es, such as hills, a dip in the road etc. • When multiple vehicles approach with only a small gap between each vehicle • When vehicle lanes are wide, and the vehicle in the next lane is too far away from your vehicle • When the vehicle that enters the detection area is traveling at about the same speed as your vehicle • When there is a significant difference in height between your vehicle and the vehicle that enters the detection area • Directly after the BSM main switch is set to on • When your vehicle is towing a trailer ●Instances of the Blind Spot Monitor function unnecessarily detecting a vehicle and/ or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guardrail, wall etc. • When there is only a short distance between your vehicle and a following vehicle • When vehicle lanes are narrow and a vehicle driving 2 lanes across from your vehi- cle enters the detection area • When items such as a bicycle carrier are installed on the rear of the vehicle IS300h_EE(OM53D56E)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders