or
owners manual Lexus NX
owners manual Lexus NX - year of production: 2014 - Lexus NX owners manual EN
Document:
pdf (8.24 MB) 663 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Lexus NX, year of production 2014:
4-5. Using the driving support systems313
■The Blind Spot Monitor function is operational when
●The BSM main switch is set to on
●Vehicle speed is greater than approximately 10 mph (16 km/h).
■The Blind Spot Monitor function will detect a vehicle when
●A vehicle in an adjacent lane overtakes your vehicle.
●Another vehicle enters the detection area when it changes lanes.
■Conditions under which the Blind Spot Monitor function will not detect a vehicle
The Blind Spot Monitor function is not designed to detect the following types of vehicles
and/or objects:
●Small motorcycles, bicycles, pedestrians, etc.*
●Vehicles traveling in the opposite direction
●Guardrails, walls, signs, parked vehicles and similar stationary objects*
●Following vehicles that are in the same lane*
●Vehicles driving 2 lanes across from your vehicle*
*: Depending on conditions, detection of a vehicle and/or object may occur.
■Conditions under which the Blind Spot Monitor function may not function correctly4
●The Blind Spot Monitor function may not detect vehicles correctly in the following con-
ditions: Dr
During bad weather such as heavy rain, fog, snow, etc.ivi
n
When ice or mud, etc., is attached to the rear bumperg
When driving on a road surface that is wet due to rain, standing water, etc.
When there is a significant difference in speed between your vehicle and the vehicle
that enters the detection area
When a vehicle is in the detection area from a stop and remains in the detection
area as your vehicle accelerates
When driving up or down consecutive steep inclines, such as hills, a dip in the road,
etc.
When multiple vehicles approach with only a small gap between each vehicle
When vehicle lanes are wide, and the vehicle in the next lane is too far away from
your vehicle
When the vehicle that enters the detection area is traveling at about the same speed
as your vehicle
When there is a significant difference in height between your vehicle and the vehicle
that enters the detection area
Directly after the BSM main switch is set to on
●Instances of the Blind Spot Monitor function unnecessarily detecting a vehicle and/or
object may increase under the following conditions:
When there is only a short distance between your vehicle and a guardrail, wall, etc.
When there is only a short distance between your vehicle and a following vehicle
When vehicle lanes are narrow and a vehicle driving 2 lanes across from your vehi-
cle enters the detection area
When items such as a bicycle carrier are installed on the rear of the vehicle
NX200t_U_OM78006U
Download PDF
Click here to download a pdf file with an instruction manual for Lexus NX
year of production from: 2014
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Lexus NX owners manual
pages 312 - 318
Lexus NX owners manual
page 315 / 663
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF