Infiniti QX56 QXII owners manual page 315

text version of content this owner's manual page from owners manual to the vehicle Infiniti QX56, year of production 2004 - 2010:

4WDShift Wheels Indicator Light UseConditions 4WDShiftProcedure Switch PositionDriven4WDshift Transfer 4LO position Movethe4WDswitch. Rear wheels For driving on paved or slippery roads2WD<—>AUTO<—>4H or 4 wheels 4WDshiftindicator light will indicate transfer shift AUTO position engaged. IT IS NOT NECESSARYTOMOVETHEAUTO- Rear wheels For driving on dry, paved roads (EconomyMATICTRANSMISSIONSELECTLEVERTOTHE drive) or state dynamometer I/M testingNPOSITIONINTHISOPERATION.PERFORM 2WD THIS OPERATIONWHENDRIVINGSTRAIGHT. 4wheels For driving on rocky, sandy or snow- covered roads 4H Neutral Neutral disengages the automatic transmis-1. Stop the vehicle. sion mechanical parking lock, which will2.Movetheautomatic transmission selector *1 allow the vehicle to roll. Do not leave thelever to the N position. Mayblink transfer shift position in Neutral.*23.Push the 4WD shift switch and move it to 4LOor4Hwiththebrakepedaldepressed. YOUCANNOTMOVETHETRANSFER4WD 4LO 4wheels For use when maximum power and tractionSHIFT SWITCHBETWEEN4HAND4LO(OR is required (for example: on steep grades4LOTO4H)UNLESSYOUHAVEFIRST Illuminated or rocky, sandy, muddy roads)STOPPEDTHEVEHICLE,DEPRESSEDTHE BRAKEPEDALANDMOVEDTHEAUTOMATIC TRANSMISSIONSHIFTLEVERTONEUTRAL.*3 *1: Thetransfer4LOpositionindicatorlightmayblink.Stopthevehicle.Besuretoshiftthe4WDshiftswitchaftertheautomatictransmissionleverhasbeen shifted to the N position. If the indicator light keeps blinking after the 4WD shift procedure in the previous page, drive slowly without abrupt maneuvers for a while. Then the light will turn on or off. • Avoid making a turn or abrupt starts while shifting to 4LO. Otherwise gears may grind, damaging the drive system. *2: While changing in and out of 4LO, the ignition key must be ON and the vehicle’s engine must be running for a shift to take place and for the indicator lights (4WD shift and 4LO position indicator) to be operable. Otherwise, the shift will not take place and no indicator lights will be on or flashing. *3: Makesurethetransfer4LOpositionindicatorlightturnsonwhenyoushiftthe4WDshiftswitchto4LO.Theindicator light will also turn on when 4LOisselected. See “Vehicle dynamic control system”later in this section. Starting and driving 5-41 ZREVIEWCOPY—2008Infiniti QX56 (iwz) Owners Manual—USA_English (nna) 03/02/07—debbieX

owners manual Infiniti QX56

owners manual Infiniti QX56 - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Infiniti QX56 QXII owners manual EN