owners manual Chevrolet Corvette

all ratings: 0 average rating: 5

5. Then replace the pressure cap. Be sure theWhentoCheckPowerSteering Fluid pressure cap is hand-tight and fully seated.It is not necessary to regularly check power steering fluid Check the level in the surge tank when the systemunless you suspect there is a leak in the system or has cooled down. If the coolant is not at theyou hear an unusual noise. A fluid loss in this system proper level, repeat Steps 1 through 4, then reinstallcould indicate a problem. Have the system inspected the pressure cap. If the coolant is not at theand repaired. proper level when the system cools down again, see your dealer/retailer. HowtoCheckPowerSteering Fluid Power Steering Fluid To check the power steering fluid, do the following: 1. Turn the ignition off and let the engine compartment See Engine Compartmentcool down. Overview on page 5-14 for2. Wipe the cap and the top of the reservoir clean. reservoir location.3. Unscrew the cap and wipe the dipstick with a clean rag. 4. Replace the cap and completely tighten it. 5. Remove the cap again and look at the fluid level on the dipstick. There are markings on both sides of the dipstick. The level should be at the FULL COLD mark. If necessary, add only enough fluid to bring the level up to the mark. 5-39

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders