owners manual Hyundai i10

owners manual Hyundai i10 - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013 - Hyundai i10 I 1 owners manual EN

Document: pdf (38.84 MB) 354 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai i10, year of production 2007 - 2013:

Maintenance G201004AEN G201006AUN Tread wear 4.Tire ply composition and material6. Maximum load rating The tread wear grade is a compara- The number of layers or plies of rub- This number indicates the maximum tive rating based on the wear rate of ber-coated fabric in the tireload in kilog. Tirerams and pounds that the tire when tested under controlled manufacturers also must indicate thecan be carried by the tire. When conditions on a specified govern- materials in the tire, which includereplacing the tires on the vehicle, ment test course. For example, a tire steel, nylon, polyester, and othersalways use a tire that has the same. graded 150 would wear one-and-a- The letter "R" means radial ply con-load rating as the factory installed half times (1½) as well on the gov- struction; the letter "D" means diago-tire. ernment course as a tire graded 100. nal or bias ply construction; and the The relative performance of tires letter "B" means belted-bias ply con- G2010007BEN depends upon the actual conditions struction. 7. Uniform tire quality grading of their use, however, and may depart significantly from the norm Quality grades can be found where due to variations in driving habits, G201005AUN applicable on the tire sidewall between tread shoulder and maxi- 5. Maximum permissible inflation service practices and differences in pressure mum section width. road characteristics and climate. For example: These grades are molded on the This number is the greatest amount of air pressure that should be put in side-walls of passenger vehicle tires. TREADWEAR 200 the tire. Do not exceed the maximumTRACTION AA The tires available as standard or permissible inflation pressure. Refer TEMPERATURE A optional equipment on your vehicle to the Tire and Loading Information may vary with respect to grade. label for recommended inflation pressure. 749

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai i10
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.