owners manual Hyundai Sonata

owners manual Hyundai Sonata - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Hyundai Sonata VI 6 YF i45 owners manual EN

Document: pdf (7.33 MB) 411 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Sonata, year of production 2009 - 2014:

What to do in an emergency 9. Loosen the wheel nuts and (Continued) remove them with your fingers. If there is, remove it. If there is Slide the wheel off the studs and not good contact on the mount- lay it flat so it cannot roll away. To ing surface between the wheel put the wheel on the hub, pick up and hub, the wheel nuts could the spare tire, line up the holes come loose and cause the loss with the studs and slide the wheel of a wheel. Loss of a wheel may onto them. If this is difficult, tip the wheel slightly and get the top hole result in loss of control of the vehicle.This may cause serious in the wheel lined up with the top injury or death. stud. Then jiggle the wheel back and forth until the wheel can be OUN046019 slid over the other studs. Then position the wrench as shown 10.To reinstall the wheel, hold it on in the drawing and tighten the wheel the studs, put the wheel nuts on WARNING the studs and tighten them finger nuts. Be sure the socket is seated Wheels may have sharp edges. tight.The nuts should be installedcompletely over the nut.Do not stand Handle them carefully to avoid on the wrench handle or use an with their tapered small diameter possible severe injury. Before extension pipe over the wrench han- ends directed inward. Jiggle the putting the wheel into place, be dle. Go around the wheel tightening tire to be sure it is completely sure that there is nothing on the every other nut until they are all tight. seated, then tighten the nuts as hub or wheel (such as mud,tar, Then double-check each nut for much as possible with your fin- gravel, etc.) that prevents the tightness. After changing wheels, gers again. have an authorized HYUNDAI dealer wheel from fitting solidly 11. Lower the car to the ground by against the hub. tighten the wheel nuts to their proper turning the wheel nut wrench (Continued) counterclockwise. torque as soon as possible. Wheel nut tightening torque: Steel wheel & aluminum alloy wheel: 65~79 lb·ft (9~11 kg·m) 6 16

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Sonata
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.