Audi A5 owners manual page 31

text version of content this owner's manual page from owners manual to the vehicle Audi A5, year of production 2007:

document_0900452a8179700c.book Seite 29 Donnerstag, 22. März 2007 10:19 10 Driver information system 29 Clearing speed limit • Speed warning - to set the speed above which a warning signal – Drive the vehicle at a minimum of 5 km/h. will sound. – Press the SET button for at least 2 seconds. Speed limit warning 2 can be adjusted in increments of 10 km/h between 30 and 240 km/h. The speed warning symbol  lights up briefly in the display to confirm that the selected speed has been stored. The speed limit Auto-check control that has been set remains stored until another speed is set with a brief push of the button, or until the memory is cleared with a long Introduction push of the button. When the speed limit has been cleared, the display will show a The auto-check control checks important components and vehicle crossed-out warning symbol . systems. These background checks are run constantly, as long as the ignition is switched on. Applies to vehicles: with speed warning function A message is displayed in the instrument cluster if a fault should Setting speed limit warning 2 occur or if any maintenance or repairs are urgently required. This is You can use the MMI* or sound system control console to accompanied by an audible warning signal. Depending on the set, alter or cancel speed limit warning 2. priority of the fault, a red or yello w warning symbol lights up in the display. The red symbols indicate a serious malfunction , whereas the yellow ones represent other malfunctions or items requiring attention. Additional messages to assist the driver may be shown with the red or yellow symbols. Automatic gearbox* function test The auto-check control automatically checks the vehicle systems Fig. 23 MMI display: when the ignition is switched on. If the selector lever is in position Setting speed limit P or N, the following instruction will appear: warning 2 When stationary apply footbrake while selecting gear – Select: Function selector button CAR > Instrument When a gear (R, D etc.) is selected, this message disappears and the cluster > Speed warning. auto-check control function is displayed. • Speed warning on/off - to activate or deactivate the speed The driver message will disappear 30 seconds after switching on the ignition or earlier, if there are other driver messages or malfunc- warning function ⇒ fig. 23. tions. Controls Safety Driving tips General maintenance Self-help Technical data

owners manual Audi A5

owners manual Audi A5 - year of production: 2007 - Audi A5 owners manual EN