Seat Cordoba II 2 owners manual page 31

text version of content this owner's manual page from owners manual to the vehicle Seat Cordoba, year of production 2002 - 2009:

COR_ING_0707 Seite 29 Mittwoch, 1. August 2007 6:25 18 Airbag system29 Monitoring of airbag and belt tension device systemdamaged. The consequence may be that, in the event of an accident, the The functionality of the airbag and belt tension device system is constantly airbag inflates incorrectly or does not inflate at all. monitored electronically. The warning lamp  will light up for a few seconds The relevant safety requirements must be observed when the vehicle or every time the ignition is switched on (self-diagnosis).components of the airbag are scrapped. The specialist workshops and the The system must be checked when the warning lamp  :Vehicle disposal centres are familiar with these requirements. • does not come on when the ignition is switched on, • does not go out about 4seconds after the ignition is switched on,WARNING • goes out and then comes on again after the ignition is switched on,• If repairs are not carried out by a professional, or if the airbags are used • or if it comes on or flickers while the car is moving.incorrectly, the risk of severe or fatal injuries is increased. The airbags may fail to inflate, or could inflate in the wrong circumstances. In the event of a malfunction, the warning lamp remains on continuously. • Do not cover or stick anything on the steering wheel hub or the soft Have the airbag system inspected immediately by a qualified workshop.plastic surface of the airbag unit on the passenger side of the dashboard, If any of the airbags are de-activated by the Authorised Service Centre, the and do not obstruct or modify them in any way. indicator lights for several seconds more after the verificati on and will turn off • It is important not to attach any objects such as cup holders or tele- if there is no fault. phone mountings to the surfaces covering the airbag units. • To clean the steering wheel or dash panel, you may use only a dry cloth WARNING or one moistened with water. Never clean the dash panel and surface of the • If there is a malfunction, the airbag and belt tension device system airbag module with cleansers containing solvents. Solvents cause the cannot properly perform its protective function. surface to become porous. If the airbag inflates, disintegrating plastic • If a malfunction should occur, have the system checked immediately by parts can cause substantial injuries. a qualified workshop. Otherwise there is a risk that, in the event of an acci-• Never attempt to repair, adjust, remove or install parts of the airbag dent, the airbag system and belt tension devices may not be triggered, or system. may not be triggered correctly. • Any work on the airbag system or removal and installation of the airbag components for other repairs (such as repairs to the steering wheel) should be performed only by a qualified workshop. Qualified workshops have the necessary tools, repair information and qualified personnel. Repair, care and disposal of the airbags • We urgently recommend that you go to a qualified workshop for all work on the airbag system. The parts of the airbag system are installed in various places in your vehicle. • Never attempt to alter the front bumper or the body. If you work on the airbag system or remove and install parts of the system • The airbags provide protection for one accident only, if they have been when performing other repair work, parts of the airbag system may be deployed they must be replaced. Safety First Operating instructions Tips and Maintenance Technical Data

owners manual Seat Cordoba

owners manual Seat Cordoba - year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Seat Cordoba II 2 owners manual EN