owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN

Document: pdf (3.02 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (313,1) ¯ FOR Krom MODELS Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the vinyl bag. . License plate bracket . J-nut 6 2 . Screw 6 4 . Screw grommet 6 4 1. Park the vehicle on flat, level ground. 2. Temporarily place the license plate bracket while aligning points Aof the front bumper * fascia with holesBin the license plate * bracket. 3. Confirmthat points A and B arealigned. * * Hold the license plate bracket and mark the points C on the bumper facia through the * center of the holes Dwith a felt-tip pen. * 4. Remove the license plate bracket. 5. Carefully drill two shallow pilot holesA * and C using a 0.39 in (10 mm) drill bit at * the marked locations. (Be sure that the drill only goes through the fascia, or damage to the nut may occur.) STI06486. Insert grommets into the hole on the fascia. Technical and consumer information 9-13 Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.