or
owners manual BMW X5 X6 F15 F16
owners manual BMW X5 X6 F15 F16 - year of production: 2013 - BMW X5 X6 F15 F16 owners manual EN
Document:
pdf (9.9 MB) 345 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle BMW X5 X6 F15 F16, year of production 2013:
Seite 309
Breakdown assistance Mobility
Bodywork contact between vehicles aid terminal of the vehicle providing assisѪ
tance.
There must not be any contact between
the bodies of the two vehicles, otherwise there3.Attach the other end of the cable to the
is a danger of shorting.◀ positive terminal of the battery, or to the
corresponding starting aid terminal of the
vehicle to be started.
Starting aid terminals
4. Attach one terminal clamp of the negative
Connecting order
jumper cable to the negative terminal of
Connect the jumper cables in the correct
the battery, or to the corresponding engine
order; otherwise, there is the danger of injury
or body ground of the vehicle providing asѪ
from sparking.◀
sistance.
5. Attach the other end of the cable to the
negative terminal of the battery, or to the
corresponding engine or body ground of
the vehicle to be started.
Starting the engine
Never use spray fluids to start the engine.
1. Start the engine of the assisting vehicle
and let it run for several minutes at an inѪ
The so-called starting aid terminal in the enѪ
creased idle speed.
gine compartment acts as the battery's posiѪ
If the vehicle being started has a diesel enѪ
tive terminal. Fold open the cover. To do so,
gine: let the engine of the assisting vehicle
pull the tab.
run for approx. 10 minutes.
2. Start the engine of the vehicle being
started in the usual way.
If the first starting attempt is not successѪ
ful, wait a few minutes before making anѪ
other attempt in order to allow the disѪ
charged battery to recharge.
3. Let both engines run for several minutes.
4. Disconnect the jumper cables in the reѪ
verse order.
The body ground or a special nut acts as the
Check the battery and recharge if necessary.
negative terminal.
Connecting jumper cables
Tow-starting and towing
1. Fold open the cover of the BMW starting-
Observe applicable laws and regulations
aid terminal. To do so, pull the tab.
Observe applicable laws and regulations
2. Attach one terminal clamp of the positive
for tow-starting and towing.◀
jumper cable to the positive terminal of the
battery, or to the corresponding starting
309
Online Edition for Part no. 01 40 2 918 440 - III/13
Download PDF
Click here to download a pdf file with an instruction manual for BMW X5 X6 F15 F16
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
BMW X5 X6 F15 F16 owners manual
pages 306 - 312
BMW X5 X6 F15 F16 owners manual
page 309 / 345
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: