owners manual Hyundai Genesis

owners manual Hyundai Genesis - year of production: 2008, 2009, 2010, 2011, 2012, 2013 - Hyundai Genesis I 1 owners manual EN

Document: pdf (9.02 MB) 399 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Genesis, year of production 2008 - 2013:

What to do in an emergency 13. Reinstall the wheel cap by fitting CAUTION the boss of the wheel cap in the Your vehicle has metric threads groove of the wheel, hitting the center of the wheel cap with youron the wheel studs and nuts. hand (If equipped). Make certain during wheel If you have a tire gauge, remove theremoval that the same nuts that valve cap and check the air pressure.were removed are reinstalled - or, if replaced, that nuts with If the pressure is lower than recom- metric threads and the same mended, drive slowly to the nearest chamfer configuration are used. service station and inflate to the cor- Installation of a non-metric rect pressure. If it is too high, adjust thread nut on a metric stud or OBH068013 it until it is correct.Always reinstall vice-versa will not secure the the valve cap after checking or Then position the wrench as shown wheel to the hub properly and adjusting tire pressure. If the cap is in the drawing and tighten the wheel will damage the stud so that it not replaced, air may leak from the nuts. Be sure the socket is seated must be replaced. completely over the nut.Do not standtire. If you lose a valve cap, buy another and install it as soon as pos-Note that most lug nuts do not on the wrench handle or use an sible. have metric threads. Be sure to extension pipe over the wrench han- use extreme care in checking After you have changed wheels, dle. Go around the wheel tightening for thread style before installing every other nut until they are all tight.always secure the flat tire in its place aftermarket lug nuts or wheels. and return the jack and tools to their Then double-check each nut for proper storage locations. If in doubt, consult an author- tightness. After changing wheels, ized HYUNDAI dealer. have an authorized HYUNDAI dealer tighten the wheel nuts to their proper torque as soon as possible. Wheel nut tightening torque: Steel wheel & aluminum alloy wheel: 65~79 lb·ft (9~11 kg·m) 617

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Genesis
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.