or
owners manual Porsche Panamera
owners manual Porsche Panamera - year of production: 2009 - Porsche Panamera 970 owners manual EN
Document:
pdf (8.35 MB) 343 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Porsche Panamera, year of production 2009:
External Power Supply, f Carefully ensure that tools or conductive
Jump-Lead Starting jewelery (rings, chains, watch straps) do not
come into contact with the positive jumper
If the battery is flat, the battery of another vehicle cable or the positive battery post.
can be used for starting or as an external power f Improper hook-up of jumper cables can ruin
supply with the help of jump leads.the alternator.
Both batteries must be 12 V batteries. Danger of caustic burns.
The capacity (Ah) of the donor battery must not be
substantially less than that of the flat battery.f Do not lean over the battery.
The flat battery must be connected correctly to Danger of gas explosion.
the vehicle’s electrical system.
f Improper use of booster battery to start a
Warning! vehicle may cause an explosion, resulting in
Risk of short circuit, damage and explosion, serious personal injury or death.
resulting in serious personal injury or death. f Keep sources of ignition away from the
f Use only jumper cables of adequate diameter battery, e.g. open flame, burning cigarettes or
cross-section and fitted with completely sparking due to cable contact or welding work.
insulated alligator clips.f A discharged battery can freeze even at + = Positive terminal for jump-lead starting
f Follow all warnings and instructions of the 14°F (−10 °C). Before connecting jumper – = Ground point for jump-lead starting
jumper cable manufacturer.cables, a frozen battery must be thawed out.External power supply/jump-lead starting
f When connecting jumper cables, make sure Always observe the sequence below:
that they cannot get caught in any moving
parts in the engine compartment. 1. Open the cap on the positive terminal for
The jumper cables must be long enough so jump-lead starting (+).
that neither vehicles nor cables touch another. 2. Attach the positive lead first to the positive
f The vehicles must not be in contact, otherwise terminal for jump-lead starting (+), then to the
current might flow as soon as the positive positive terminal of the donor battery.
terminals are connected. 3. Connect the negative lead first to the negative
f The cable clamps must not be allowed to terminal of the donor battery, then to the
contact each other when one end of the ground point for jump-lead starting (–).
jumper cables are connected to a battery.
306 Minor Repairs
Download PDF
Click here to download a pdf file with an instruction manual for Porsche Panamera
year of production from: 2009
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Porsche Panamera 970 owners manual
pages 305 - 311
Porsche Panamera 970 owners manual
page 308 / 343
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Other available language versions of this manual:
Porsche Panamera I 1 manuel du proprietaire FR
show the owner's manual
pdf - 20.92 MB