manual Mercedes Benz R Class owners manual page 305

text version of content this owner's manual page from owners manual to the vehicle Mercedes R, year of production 2005 - 2013:

BA 251 USA, CA Edition A 2011; 1; 3, en-US2010-04-16T14:31:55+02:00 - Seite 303 d2sboike Version: 3.0.3.5 Flat tire303 XOn downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle. Raising the vehicle GWarning When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up XUsing lug wrench :, loosen the bolts on the vehicle at the jacking points built into both the wheel you wish to change by about one sides of the vehicle. The jack saddle must be full turn. Do not unscrew the bolts placed centrally under the jacking point. The completely. jack must always be vertical when in use, especially on inclines or declines.The jacking points for the jack are located behind the wheel housings of the front wheels The jack is intended only for lifting the vehicle and in front of the wheel housings of the rear briefly for wheel changes. It is not suited for wheels (arrows). performing maintenance work under the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet Roadside Assistance away from the area under the lifted vehicle. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. Always firmly engage the parking brake and block the wheels with wheel chocks or other sizable objects before raising the vehicle withGWarning the jack. Do not disengage the parking brake The jack is designed exclusively for jacking up while the vehicle is raised. the vehicle at the jacking points. The jack Make sure that the ground on which thesaddle must be placed centrally under the vehicle is standing and where you place thejacking point. jack is solid, level and not slippery. If If you do not position the jack correctly in the necessary, use a large underlay. On slippery jacking point, the vehicle can fall off the jack surfaces, such as tiled floors, you should use and seriously or fatally injure you or others. a non-slip underlay, for example a rubber mat. ! The jack is designed exclusively for Do not use wooden blocks or similar objects jacking up the vehicle at the jacking points. as a jack underlay. Otherwise, the jack may Otherwise, your vehicle could be damaged. not be able to achieve its load-bearing capacity if it is not at its full height. XTake ratchet ring spanner out of the vehicle Never start the engine when the vehicle istool kit and place it on the hexagon nut of raised. the jack so that the letters AUF are visible. Also observe the notes on the jack. Z

owners manual Mercedes R

owners manual Mercedes R - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 - Mercedes Benz R Class owners manual EN