owners manual Suzuki Grand Vitara

all ratings: 1 average rating: 5

Jump Starting Instructions: 7 Towing a Disabled Vehicle: 6 If the Starter Does Not Operate: 2, 9 EMERGENCY SERVICE NOTE: facing the wheel. Tighten each nut Remove the full wheel cover from the bot- snugly by hand until the wheel is tom part to the upper part. Otherwise, the (B) securely seated on the hub. claws may be broken. (Half cover type) 78K153 (4) 5) Pull out the lock cover (B) fitted on the EXAMPLE (5) lock nut of the spare wheel while insert- ing the key full into the key hole of the 81A057 lock cover (B). Tightening torque for wheel nut 78K060 6) Remove the lock nut and wheel nuts of 100 Nm (10.0 kg-m, 72.3 lb-ft) NOTE: the spare wheel, then remove the spare6) Lower the jack and fully tighten the nuts wheel with both hands. If your vehicle is equipped with the half in a crisscross fashion with a wrench as cover, remove the center bolt (4), then To change the wheel: shown in the illustration. remove the outer cor ve(5) of the spare wheel half cover. 1) Loosen, but do not remove the wheel nuts. 2) Jack up the vehicle (follow the jacking instructions in this section) 3) Remove the wheel nuts and wheel. 4) Before installing the new wheel, clean any mud or dirt off from the surface of the wheel and hub with a clean cloth. Clean the hub carefully; it may be hot from driving. 5) Install the new wheel and replace the wheel nuts with their cone shaped end 8-4 79K21-03E

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders