or
owners manual Hyundai i10
owners manual Hyundai i10 - year of production: 2013 - Hyundai i10 II 2 owners manual EN
Document:
pdf (9.59 MB) 343 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Hyundai i10, year of production 2013:
Maintenance
4.Tire ply composition and material7. Uniform tire quality grading
WARNING - Tire age The number of layers or plies of rub- Quality grades can be found where
ber-coated fabric are in the tire.applicabTirele on the tire sidewall
Tires degrade over time, even
manufacturers also must indicate thebetween tread shoulder and maxi-
when they are not being used.
materials in the tire, which includemum section width.
Regardless of the remaining
steel, nylon, polyester, and others.
tread, we recommend that tires For example:
The letter "R" means radial ply con-
generally be replaced after six TREADWEAR 200
struction; the letter "D" means diago-
(6) years of normal service. TRACTION AA
Heat caused by not climates or nal or bias ply construction; and the
letter "B" means belted-bias ply con-
frequent high loading condi-
TEMPERATURE A
struction.
tions can accelerate the aging
process. Failure to follow this Tread wear
Warning can result in sudden
5. Maximum permissible inflationThe tread wear grade is a compara-
tire failure, which could lead topressure tive rating based on the wear rate of
a loss of control and an acci-
This number is the greatest amount
dent involving serious injury or the tire when tested under controlled
of air pressure that should be put in
death. the tire. Do not exceed the maximumconditions on a specified govern-
permissible inflation pressure. Refer ment test course. For example, a tire
graded 150 would wear one-and-a-
to the Tire and Loading Information
half times (1½) as well on the gov-
label for recommended inflation
pressure. ernment course as a tire graded 100.
The relative performance of tires
6. Maximum load rating depends upon the actual conditions
of their use, however, and may
This number indicates the maximum
depart significantly from the norm
load in kilograms and pounds that
due to variations in driving habits,
can be carried by the tire. When
service practices and differences in
replacing the tires on the vehicle,
road characteristics and climate.
always use a tire that has the same
load rating as the factory installed
tire.
749
Download PDF
Click here to download a pdf file with an instruction manual for Hyundai i10
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Hyundai i10 II 2 owners manual
pages 298 - 304
Hyundai i10 II 2 owners manual
page 301 / 343
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF