or
owners manual Jeep Grand Cherokee
owners manual Jeep Grand Cherokee - year of production: 2013 - Jeep Grand Cherokee WK2 WH2 owners manual EN
Document:
pdf (3.08 MB) 472 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Jeep Grand Cherokee, year of production 2013:
Disabling HDC • TheclustericonandswitchlampwillflashforSelec Speed Control (SSC) — If
HDCwill be deactivated and disabled if any ofseveral seconds then extinguish when theEquipped
the following conditions occur:driver pushes the HDC switch but enableSSCisintendedforoffroaddrivingin4WDLow
conditions are not met.Range only. SSC maintains vehicle speed by
• The driver pushes the HDC switch.• Theclustericonandswitchlampwillflashforactively controlling engine torque and brakes.
• The driveline is shifted out of 4WD Lowseveral seconds then extinguish when HDCSSChasthree states:
Range. disables due to excess speed.
• The parking brake is applied. 1. Off (feature is not enabled and will not acti-
• The cluster icon and switch lamp will flashvate).
• Driver door opens. when HDC deactivates due to overheated
brakes. The flashing will stop and HDC will2. Enabled (feature is enabled and ready but
• The vehicle is driven greater than 20 mphactivate again once the brakes have cooledactivation conditions are not met, or driver is
(32 km/h) for greater than 70 seconds.sufficiently.actively overriding with brake or throttle ap-
• The vehicle is driven greater than 40 mph plication).
(64 km/h) (HDC exits immediately).WARNING! 3. Active (feature is enabled and actively con-
• HDCdetects excessive brake temperature.HDC is only intended to assist the driver introlling vehicle speed).
Feedback To The Driver controlling vehicle speed when descendingEnabling SSC
TheinstrumentclusterhasanHDCiconandthehills. The driver must remain attentive to the
HDCswitchhasanLEDwhichofferfeedbacktodriving conditions and is responsible forSSCisenabledbypushingtheSSCswitch,but
the driver about the state HDC is in.maintaining a safe vehicle speed.the following conditions must also be met to
enable SSC:
• The cluster icon and switch lamp will illumi-• Driveline is in 4WD Low Range.
nate and remain on solid when HDC is
enabled or activated. This is the normal • Vehicle speed is below 5 mph (8 km/h)
operating condition for HDC. • Parking brake is released.
296
Download PDF
Click here to download a pdf file with an instruction manual for Jeep Grand Cherokee
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Jeep Grand Cherokee WK2 WH2 owners manual
pages 297 - 303
Jeep Grand Cherokee WK2 WH2 owners manual
page 300 / 472
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF