owners manual Mazda 6

owners manual Mazda 6 - year of production: 2002, 2003, 2004, 2005, 2006, 2007 - Mazda 6 I 1 Atenza owners manual EN

Document: pdf (3.23 MB) 340 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mazda 6, year of production 2002 - 2007:

MaintenanceandCare AppearanceCare Insects, tar, tree sap, bird droppings, 3. When waxing, coat evenly with the industrial fallout, and similar deposits can sponge supplied or a soft cloth. damagethefinish if not removed 4. Wipe off the wax with a soft cloth. immediately. When prompt washing with plain water is ineffective, use a mild soap madeforuseonvehicles. NOTE Thoroughly rinse off all soap with Aspotremovertoremoveoil, tar, and lukewarm or cold water. Don't allow soap similar materials will usually also take to dry on the finish. off the wax. Rewax these areas even if the rest of the vehicle doesn't need it. After washing the vehicle, dry it with a clean chamois to prevent water spots from qRepairingDamagetotheFinish forming. Deepscratches or chips on the finish should be repaired promptly. Exposed WARNING metal quickly rusts and can lead to major repairs. Driving with Wet Brakes: Driving with wet brakes is dangerous. CAUTION Increased stopping distance or the vehicle pulling to one side when If your Mazda is damaged and needs braking could result in a serious metal parts repaired or replaced, make accident. Light braking will indicate sure the body shop applies anti- whether the brakes have been affected. corrosion materials to all parts, both Drythe brakes by driving very slowly repaired and new. This will prevent andapplying the brakes lightly until them from rusting. brake performance is normal. Waxing qBright-MetalMaintenance Your vehicle needs to be waxed when l Use tar remover to remove road tar and water no longer beads on the finish. insects. Never do this with a knife or Alwayswashanddrythevehicle before similar tool. waxing it. In addition to the vehicle body, l To prevent corrosion on bright-metal waxthemetaltrim to maintain its luster. surfaces, apply wax or chrome preservative and rub it to a high luster. 1. Use wax which contains no abrasives. Waxescontaining abrasive will remove l During cold weather or in coastal areas, paint and could damage bright metal cover bright-metal parts with a coating parts. of wax or preservative heavier than usual. It would also help to coat them 2. Use a good grade of natural wax for with noncorrosive petroleum jelly or metallic, mica, and solid colors. someother protective compound. 8-50

Download PDF

Click here to download a pdf file with an instruction manual for Mazda 6
year of production from: 2002

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.