Subaru Impreza IV 4 owners manual page 297

text version of content this owner's manual page from owners manual to the vehicle Subaru Impreza, year of production 2011 - 2016:

Black plate (324,1) 7-22 Starting and operating &Selection of “L” (if equipped)illuminate on the combination meter. Inturned to the “LOCK” position. this mode, the transmission shifts up at higher engine speeds and shifts down! Shift lock release more responsively than when driving inIf the select lever cannot be operated, turn the “D” position. the ignition switch back to the“ON” To deselect “L”, move the selector lever toposition then move the select lever to the the “D” position. “P” position with the select lever button pressed and brake pedal depressed. &Shift lock function Ifthe select lever does not move after The shift lock function helps prevent theperforming the above procedure, perform improper operation of the select lever.the following steps. . The select lever cannot be operated. When the select lever cannot be unless the ignition switch is turned to theshifted from “P” to “N”: “L” is used when power is needed for rapid“ON” position and the brake pedal isRefer to “Shift lock release using the shift acceleration or for uphill driving. To selectdepressed.lock release button” F7-23. this mode, move the selector lever from. Theselect lever cannot be moved from. When the select lever cannot be the “D” position to the “L” position.the “P” position to any other positionshifted from “N” to “R”, “P”: before the brake pedal is depressed. Within 60 seconds after placing the igni- Depress the brake pedal first, and thention switch in the “ACC” position, move the operate the select lever.select lever to the “P” position with the . Only the “P” position allows you to turnselect lever button pressed and brake the ignition switch from the “ACC” positionpedal depressed. to the “LOCK” position and remove theIf you must perform the above procedure, key from the ignition switch. . If the ignition switch is turned to thethe shift lock system (or the vehicle control “LOCK”position while the select lever is insystem) may be malfunctioning. Contact a the “N” position, the select lever may notSUBARUdealerforaninspectionassoon bemovedtothe“P”position after a periodas possible. of time. Therefore, move the select leverIfthe select lever does not move after to the “P” position with the brake pedalperforming the above procedure, refer to When selected, the indicator“L” willdepressed soon after the ignition switch is“Shift lock release using the shift lock 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

owners manual Subaru Impreza

owners manual Subaru Impreza - year of production: 2011, 2012, 2013, 2014, 2015, 2016 - Subaru Impreza IV 4 owners manual EN