owners manual Hummer H3

all ratings: 0 average rating: 5

Checking Brake Fluid The brake fluid can be checked without taking off the{CAUTION: cap by looking at the brake fluid reservoir. The fluid level should be above MIN. If it is not, haveWith the wrong kind of fluid in the brake the brake hydraulic system checked to see if there ishydraulic system, the brakes might not work a leak. well. This could cause a crash. Always use the After work is done on the brake hydraulic system,proper brake fluid. make sure the level is above the MIN but not over the MAXmark. Notice: What to Add • Using the wrong fluid can badly damage brake When you do need brake fluid, use only DOT-3 brakehydraulic system parts. For example, just a fluid. Use new brake fluid from a sealed containerfew drops of mineral-based oil, such as engine only. See Recommended Fluids and Lubricants onoil, in the brake hydraulic system can damage page6-12. brake hydraulic system parts so badly that they Always clean the brake fluid reservoir cap and the areawill have to be replaced. Do not let someone around the cap before removing it. This helps keepput in the wrong kind of fluid. dirt from entering the reservoir.• If you spill brake fluid on your vehicle’s painted surfaces, the paint finish can be damaged. Be careful not to spill brake fluid on your vehicle. If you do, wash it off immediately. See Washing Your Vehicle on page 5-95. 5-39

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders