owners manual Nissan Qashqai

all ratings: 0 average rating: 5

moisture or smoke may enter the headlight9. Re-install the covers internal connector on the HEADLIGHTS LEDheadlight (where fitted) bodyandaffecttheperformanceofthehead-back of the bulb. light. 10. Re-install the cover by turning the cover assem- The LED headlight is a projector style which uses aThe headlight is a semi-sealed beam type whichbly 1/4 of a turn in the clockwise direction. LEDmodulewithout serviceable parts.uses a replaceable headlight (halogen) bulb. A bulb11. Re-installtheconnectoronthebackofthecover CAUTION can be replaced from inside the engine compart-assembly. • Topreventanelectricshock,neverattempttoment without removing the headlight assembly. modifyordisassembletheLEDheadlightsas-Contact a NISSAN dealer or qualified workshop, if12. Whereremoved(step3.),re-installtheairduct, sembly. you need assistance for bulb replacement.bolt and clips in the reverse order of removal. • If replacement is required, contact a NISSANHigh beam bulb replacement:13. Reconnect the negative (—) battery cable and dealer or qualified workshop. close the bonnet. 1. Open the bonnet. For details, see “BonnetLowbeambulbreplacement: Replacing the halogen headlight bulbrelease” in the “3. Pre-driving checks and adjustments” section. 1. Open the bonnet. For details, see “Bonnet CAUTION 2. Disconnect the negative (—) battery cable.release” in the “3. Pre-driving checks and • High pressure halogen gas is sealed inside adjustments” section. the halogen bulb. The bulb may break if the3. Whenthebrokenbulbislocatedintheheadlight2. Disconnect the negative (—) battery cable. glass envelope is scratched or the bulb isassemblyundertheairduct,carefullyremovethe dropped. air duct, see “Air duct removal” earlier in this3. Whenthebrokenbulbislocatedintheheadlight section. assemblyundertheairduct,carefullyremovethe • Whenhandlingthebulb,DONOTTOUCHTHE4. Removetheconnectorfromthebackofthecoverair duct, see “Air duct removal” earlier in this GLASSENVELOPE. assembly j1. section. • Use the same number type and wattage as5. Turn the cover assembly 1/4 of a turn in the anti4. Removetheconnectorfromthebackofthebulb originally installed. clockwisedirection andremovethecoverbydis-assembly j4. • Aiming is usually not necessary after replac-connecting the internal connector j2.5. Turn the bulb assembly 1/8 of a turn in the anti ing the bulb. When aiming adjustment is nec-6. Push and turn the retaining pin to loosen it j3.clockwise direction and remove the headlight essary, contact a NISSAN dealer or qualified bulb j5. workshop. 7. Remove the headlight bulb. Do not shake or ro-6. Install the new bulb in the headlight body by turn- • Do not leave the bulb out of the headlighttate the bulb when removing it.ing it clockwise until it is securely sealed within reflector for a long period of time as dust,8. Install the new bulb in the reverse order of re-the headlight body. moval. 7. Re-install the connector on the back of the bulb assembly. 8-28 Maintenance and do-it-yourself

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders