Mercedes Benz CL C216 2014 owners manual page 296

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Driving tips 294 All checks and maintenance work on the more firmly. Maintain a safe distance from brake system must be carried out at a vehicles in front. qualified specialist workshop. Consult a After driving on a wet road or having the qualified specialist workshop to arrange this. vehicle washed, brake firmly while paying Have brake pads installed and brake fluid attention to the traffic conditions. This will replaced at a qualified specialist workshop. warm up the brake discs, thereby drying them WARNING G more quickly and protecting them against If brake pads or brake fluid other than those corrosion. recommended are used, the braking ng rki properties of the vehicle can be degraded to Limited braking performance on salt- an extent that safe braking is substantially treated roads impaired. This could result in an accident. WARNING G ! Vehicles with 4MATIC: function or The layer of sal tont he brake discs and the performance tests may only be carried out brake pads/linings may cause a delay in the on a 2-axle dynamometer. If you are braking effect, resulting in a significantly pa and ing Driv planning to have the vehicle tested on such longer braking distance, which could lead to a dynamometer, contact an authorized an accident. Mercedes-Benz Center to obtain further To avoid this danger, you should: information first. Otherwise, you could R occasionally brake carefully, without damage the drive train or the brake system. putting other road users at risk, when you ® ! are driving on salted roads. This helps to Vehicles with 4MATIC: as the ESP remove any salt that may have started to system operates automatically, the engine build up on the brake discs and the brake and the ignition must be switched off pads/linings. (SmartKey in position 0 or 1 in the ignition lock or Start/Stop button in position 0 or R maintain a greater distance to the vehicle 1) when the electric parking brake is being ahead and drive with particular care. tested on a brake dynamometer. R carefully apply the brakes at the end of a Braking maneuvers triggere da utomatically trip and immediately after commencing a ® by ESP may seriously damage the brake new trip, so that salt residues are removed system. from the brake discs. ® ! Vehicles with 4MATIC: as the ESP Servicing the brakes system operates automatically, the engine and the ignition system must be switched ! If the red brake warning lamp lights up in off (SmartKey in position 0 or 1 in the the instrumentc luster and you hear a ignition lock or Start/Stop button in warning tone while the engine is running, position 0 or 1) when: the brake fluid level may be too low. R Observe additional warning messages in testing the electric parking brake on a the multifunction display. brake dynamometer. R The brake fluid level may be too low due to you intend to have the vehicle towed with brake pad wear or leaking brake lines. one of the axles raised. Have the brake system checked Braking maneuvers triggered automatically ® immediately. This work should be carried by ESP may seriously damage the brake out at a qualified specialist workshop. system.

owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN