BMW X5 X6 F15 F16 owners manual page 296

text version of content this owner's manual page from owners manual to the vehicle BMW X5 X6 F15 F16, year of production 2013:

Seite 296 Mobility Replacing components The manufacturer of the vehicle recommends tional lasers, are officially designated as that you entrust corresponding procedures toClass 1 light-emitting diodes. the service center if you are unfamiliar with Do not remove the covers them or they are not described here. Do not remove the covers, and never You can obtain a selection of replacement stare into the unfiltered light for several hours; bulbs at the service center. otherwise, irritation of the retina could result.◀ Danger of burns Only change bulbs when they are cool; Headlamp glass otherwise, there is the danger of getting Condensation can form on the inside of the burned.◀ headlamps in cool or humid weather. When you drive with the lights switched on, the conѪ Working on the lighting system densation evaporates after a short time. The When working on the lighting system, headlamps do not need to be changed. you should always switch off the lights afѪ If the condensation in the headlamps does not fected to prevent short circuits. evaporate after trips with the lights switched To avoid possible injury or equipment damage on, and the amount of moisture in the headѪ when replacing bulbs, observe any instructions lamps increases, for example if water droplets provided by the bulb manufacturer.◀ form, have them checked by your service cenѪ ter. Do not perform work/bulb replacement on xenon headlamps Have any work on the xenon lighting system, BMW X5: bulb replacement including bulb replacement, performed only by a service center. Xenon headlamps Due to the high voltage present in the system, there is the danger of fatal injuries if work is Notes carried out improperly.◀ Because of the long life of these bulbs, the likelihood of failure is very low. Switching the Do not touch the bulbs lamps on and off frequently shortens their life. Do not touch the glass of new bulbs with If a xenon bulb fails, switch on the front fog your bare hands, as even minute amounts of lamps and continue the trip with great care. contamination will burn into the bulb's surface Comply with local regulations. and reduce its service life. Do not perform work/bulb replacement Use a clean tissue, cloth or something similar, on xenon headlamps or hold the bulb by its base.◀ Have any work on the xenon lighting system, including bulb replacement, performed only by Light-emitting diodes LED a service center. Light-emitting diodes installed behind transluѪ Due to the high voltage present in the system, cent lenses serve as the light source for many there is the danger of fatal injuries if work is of the controls, displays and other equipment carried out improperly.◀ in your vehicle. These light-emitting diodes, which operate usѪ Follow the general instructions on lamps and ing a concept similar to that applied in convenѪ bulbs, refer to page 295. 296 Online Edition for Part no. 01 40 2 918 440 - III/13

owners manual BMW X5 X6 F15 F16

owners manual BMW X5 X6 F15 F16 - year of production: 2013 - BMW X5 X6 F15 F16 owners manual EN