owners manual Lexus RC

all ratings: 0 average rating: 5

292 4-5. Using the driving support systems ■Sounds and vibrations caused by the A brBS,ake assist, VSC, TRAC, hill-start assist control and VGRS systems ●A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move. This sound does not indicate that a malfunction has occurred in any of these sys- tems. ●Any of the following conditions may occur when the above systems are operating. None of these indicates that a malfunction has occurred. • Vibrations may be felt through the vehicle body and steering. • A motor sound may be heard after the vehicle comes to a stop. • The brake pedal may pulsate slightly after the ABS is activated. • The brake pedal may move down slightly after the ABS is activated. ■EPS, VGRS and DRS operation sound When the steering wheel is operated, a motor sound may be heard. This does not indi- cate a malfunction. ■Reactivation of the TRAC/VSC systems Even after the TRAC/VSC systems have been turned off, turning the engine off and then on again will automatically reactivate the TRAC/VSC systems. ■Reactivation of the TRAC system linked to vehicle speed When only the TRAC system is turned off, the TRAC system will turn on when vehicle speed increases. However, when both TRAC/VSC systems are turned off, the systems will not turn on even when vehicle speed increases. ■Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off. The EPS system should return to normal within 10 minutes. ■Operating conditions of hill-start assist control When the following four conditions are met, the hill-start assist control will operate: ●The shift lever is in a position other than P or N (when starting off forward/backward on an upward incline). ●The vehicle is stopped. ●The accelerator pedal is not depressed. ●The parking brake is not engaged. ■Automatic system cancelation of hill-start assist control The hill-start assist control will turn off in any of the following situations: ●The shift lever is moved to P or N. ●The accelerator pedal is depressed. ●The parking brake is engaged. ●Approximately 2 seconds elapse after the brake pedal is released. RC350_RC300_RC200t_RC F_U (OM24671U)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders