Nissan Rogue I 1 owners manual page 292

text version of content this owner's manual page from owners manual to the vehicle Nissan Rogue, year of production 2007 - 2013:

Black plate (301,1) Sway control device ver when not in use. After the hitchTrailer lights Sudden maneuvers, wind gusts and buffetingis removed, seal the bolt holes to caused by other vehicles can affect trailerprevent exhaust fumes, water orCAUTION handling. Sway control devices may be used todust from entering the passenger help control these affects. If you choose to usecompartment. Whensplicingintothevehicle electrical one, contact a reputable trailer hitch supplier to.Regularly check that all trailer hitchsystem, a commercially available makesuretheswaycontroldevicewillwork with power-type module/converter must be the vehicle, hitch, trailer and the trailer’s brakemounting bolts are securely mounted. used to provide power for all trailer system. Follow the instructions provided by the lighting. This unit uses the vehicle manufacturer for installing and using the sway battery as a direct power source for all control device. Tire pressures trailer lights while using the vehicle tail Class I hitch . When towing a trailer, inflate the vehiclelight, stoplight and turn signal circuits tires to the recommended cold tire pressureas a signal source. The module/con- Class I trailer hitch equipment (receiver, ballindicated on the Tire and Loading Informa- mount and hitch ball) can be used to tow trailerstion label. verter must draw no more than 15 of a maximum weight of 2,000 lb (909 kg). milliamps from the stop and tail lamp . Trailer tire condition, size, load rating andcircuits. Using a module/converter that CAUTION proper inflation pressure should be inexceedsthesepowerrequirementsmay accordance with the trailer and tire manu-damage the vehicle’s electrical system. . The hitch should not be attached tofacturers’ specifications.See a reputable trailer dealer to obtain or affect the operation of the im-Safety chains the proper equipment and to have it pact-absorbing bumper. Always use a suitable chain between yourinstalled. . Donot use axle-mounted hitches.vehicle and the trailer. The safety chains shouldTrailer lights should comply with federal and/or . Do not modify the vehicle exhaustbe crossed and should be attached to the hitch,local regulations. For assistance in hooking up system, brake system, etc. to installnot to the vehicle bumper or axle. The safetytrailer lights, contact a NISSAN dealer or chains can be attached to the bumper if thereputable trailer dealer. a trailer hitch. hitch ball is mounted to the bumper. Be sure to . To reduce the possibility of addi-leave enough slack in the chains to permitTrailer brakes tional damage if your vehicle isturning corners. If your trailer is equipped with a braking system, struck from the rear, where practi- make sure it conforms to federal and/or local cal, remove the hitch and/or recei- regulations and that it is properly installed. Technical and consumer information 9-21 Model "S35-D" EDITED: 2007/ 12/ 19

owners manual Nissan Rogue

owners manual Nissan Rogue - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013 - Nissan Rogue I 1 owners manual EN