owners manual Volvo XC40

all ratings: 0 average rating: 5

DRIVER SUPPORT To temporarily switch off Adaptive Cruise Control the clutch pedal is depressed for approx. 1 speed is reduced to below 30 km/h || • • and set it in standby mode: minute - applies to cars with manual gearbox. (20 mph) - only applies to cars with manual A temporary increase in speed with the accelera- gearbox. – Press the steering wheel button (2). tor pedal, e.g. during overtaking, does not affect the driver opens the door. > Stored speed in the centre of the speed- • the setting - the car returns to the last stored the driver takes off the seatbelt. ometer changes from BEIGE to GREY speed when the accelerator pedal is released. • and the indication for time interval as well engine speed is too low/high. Automatic standby mode • as the symbol for the target vehicle, if on, one or more wheels lose traction. are switched off. The adaptive cruise control is dependent on • brake temperature is high. other systems, e.g. Electronic Stability Control • 42 ESC . If any of the other systems stops working, the parking brake is applied. WARNING • the adaptive cruise control is deactivated auto- the camera and radar unit is covered by e.g. With the adaptive cruise control is in • • matically. snow or heavy rainfall (camera lens/radio standby mode, the driver must intervene waves are blocked). and regulate both speed and distance to WARNING the vehicle ahead. Reactivating adaptive cruise control When the adaptive cruise control is in With automatic standby mode, the driver is • warned via an acoustic signal and a message from standby mode standby mode and the car comes too close on the driver display. to a vehicle ahead, the driver is warned of The driver must then regulate the car€s the short distance by the Distance Warn- • ing function instead. speed, apply the brakes as needed and maintain a safe distance to other vehicles. Standby mode on driver intervention Automatic standby mode may occur if: The Adaptive cruise control is temporarily deacti- the speed is below 5 km/h (3 mph) and ACC vated and set in standby mode if: • is uncertain whether the vehicle ahead is a the foot brake is used. • stationary vehicle or an object, such as a the gear selector is moved to N position. speed bump. • the speed is below 5 km/h (3 mph) and the the driver maintains a speed higher than the • • NOTE: The illustration is schematic - details may vary stored speed for longer than 1 minute. vehicle ahead turns off so that ACC no depending on car model. longer has a vehicle to follow. 42 Electronic Stability Control 288

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders