owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US2010-05-20T09:17:30+02:00 - Seite 287 hereepe Version: 3.0.3.6 Tire labeling287 ratio is calculated by dividing the tire width by Tire size designation, load-bearing the tire height. capacity and speed index Tire code: tire code = specifies the tire type. "R" represents radial tires. "D" represents diagonal tires, "B" represents diagonal radial tires. Optionally, tires with a maximum speed of over 149 mph (240 km/h) may have "ZR" in the size description depending on the manufacturer (e.g. 245/40 ZR 18). Rim diameter: rim diameter ? is the diameter of the bead seat, not the diameter of the rim flange. The rim diameter is :Tire width specified in inches (in). ;Nominal aspect ration in % Load bearing index: load bearing index A =Tire code is a numerical code which specifies the ?Rim diameter maximum load-bearing capacity of a tire. ALoad bearing index GWarning BSpeed index The tire load rating must always be at least half of the GAWR of your vehicle. Otherwise, iTire data is vehicle-specific and may sudden tire failure may be the result which deviate from the data in the example. could cause an accident and/or serious injury General: depending on the manufacturer's to you or others. standards, the size imprinted in the tire wall Always replace rims and tires with rims and may not contain any letters or may contain tires having the same specifications one letter that precedes the size description. (designation, manufacturer and type) asTires and wheels If there is no letter preceding the size shown on the original part. description (as shown above): these are passenger vehicle tires according to GWarning European manufacturing standards. Do not overload the tires by exceeding the If "P" precedes the size description: these are specified load limit as indicated on the Tire passenger vehicle tires according to U.S. and Loading Information placard on the manufacturing standards. driver's door B-pillar. Overloading the tires If "LT" precedes the size description: these can overheat them, possibly causing a are light truck tires according to U.S. blowout. Overloading the tires can also result manufacturing standards. in handling or steering problems, or brake If "T" precedes the size description: these arefailure. compact emergency spare wheels at high tire Example: pressure, to be used only temporarily in an emergency. The load bearing index 91 is equivalent to a maximum load of 1356 lbs (615 kg) that the Tire width: tire width : shows the nominal tire can carry. For further information on the tire width in millimeters. maximum tire load in kilograms and pounds, Nominal aspect ration: aspect ratio ; is see (Y page 284). the size ratio between the tire height and the tire width and is shown in percent. The aspect Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders