owners manual BMW X6M F16

all ratings: 0 average rating: 5

Seite 288 Mobility Breakdown assistance Preparation 1. Check whether the battery of the other veѪ hicle has a voltage of 12 volts and approxiѪ mately the same capacitance in Ah. This information can be found on the battery. 2. Switch off the engine of the assisting vehiѪ cle. 3. Switch off any electronic systems/power consumers in both vehicles. The body ground or a special nut acts as the Bodywork contact between vehicles negative terminal. There must not be any contact between the bodies of the two vehicles, otherwise there Connecting jumper cables is a danger of shorting.◀ 1. Fold open the cover of the BMW starting- aid terminal. To do so, pull the tab. Starting aid terminals 2. Attach one terminal clamp of the positive Connecting order jumper cable to the positive terminal of the battery, or to the corresponding starting Connect the jumper cables in the correct aid terminal of the vehicle providing assisѪ order; otherwise, there is the danger of injury tance. from sparking.◀ 3. Attach the other end of the cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the vehicle to be started. 4. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle providing asѪ sistance. 5. Attach the other end of the cable to the The so-called starting aid terminal in the enѪ negative terminal of the battery, or to the gine compartment acts as the battery's posiѪ corresponding engine or body ground of tive terminal. Open the cover in the direction of the vehicle to be started. the arrow. Starting the engine Never use spray fluids to start the engine. 1. Start the engine of the assisting vehicle and let it run for several minutes at an inѪ creased idle speed. 2. Start the engine of the vehicle being started in the usual way. If the first starting attempt is not successѪ ful, wait a few minutes before making anѪ 288 Online Edition for Part no. 01 40 2 910 899 - VII/13

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders