owners manual Subaru Forester

all ratings: 0 average rating: 5

Maintenance and service 11-13 Changing the coolant 1 Never attempt to remove the radia- tor cap until the engine has been shut off and has cooled down com- pletely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed. 4. Install the under cover. 2 B00394 B00019 Turbo models Always add genuine Subaru cooling sys- 1 1) Filler neck tem conditioner whenever the coolant is 2) Fill up to this level replaced. 5. Slowly pour the coolant and fill up to Change the engine coolant and add gen- just below the filler neck, allowing enough uine Subaru cooling system conditioner room to add genuine Subaru cooling sys- using the following procedures according 2 tem conditioner in the radiator. Add genu- to the maintenance schedule. ine Subaru cooling system conditioner un- 1. Remove the under cover. til the coolant level reaches the filler neck. 2. Place a proper container under the B00360 Do not pour the coolant too quickly, as this drain plug and loosen the drain plug. Non-turbo models may lead to insufficient air bleeding and 3. Loosen the radiator cap to drain the 1) Filler neck trapped air in the system. coolant from the radiator. Then drain the2) Fill up to this level coolant from the reserve tank. Tighten the drain plug securely. – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders