Subaru Impreza IV 4 owners manual page 284

text version of content this owner's manual page from owners manual to the vehicle Subaru Impreza, year of production 2011 - 2016:

Black plate (311,1) Starting and operating7-9 the engine. the ignition switch again to the “OFF”Ifthe engine does not start, try the The starter motor will only operate whenposition. After waiting for 10 secondsfollowing. the clutch pedal is depressed fully to theor longer, turn the ignition switch to the(1) Turn the ignition switch to the floor. “START” position without depressing“OFF” position and wait for at least 4. Turn the ignition switch to the “ON”the accelerator pedal.10 seconds. After checking that the position and check the operation of the(4) If the engine still refuses to start,parking brake is firmly set, turn the warning and indicator lights. Refer tocontact your nearest SUBARU dealerignition switch to the “START” position “Warning and indicator lights” F3-9.for assistance.while depressing the accelerator pedal 5. Turn the ignition switch to the “START”6. Confirm that all warning and indicatorslightly (approximately a quarter of the position without depressing the accelera-lights have turned off after the engine hasfull stroke). Release the accelerator tor pedal. Release the key immediatelystarted. The fuel injection system auto-pedal as soon as the engine starts. after the engine has started.matically lowers the idle speed as the(2) If this fails to start the engine, turn Ifthe engine does not start, try the engine warms up.the ignition switch back to the “OFF” following. position and wait for at least 107 (1) Turn the ignition switch to the&CVTmodels seconds. Then fully depress the accel- “OFF” position and wait for at least1. Apply the parking brake.erator pedal and turn the ignition 10 seconds. After checking that the2. Turn off unnecessary lights and ac-switch to the “START” position. If the parking brake is firmly set, turn the engine starts, quickly release the ignition switch to the “START” positioncessories.accelerator pedal. while depressing the accelerator pedal3. Shift the select lever to the “P” or “N”(3) If this fails to start the engine, turn slightly (approximately a quarter of theposition (preferably the “P” position).the ignition switch again to the “OFF” full stroke). Release the acceleratorThe starter motor will only operate whenposition. After waiting for 10 seconds pedal as soon as the engine starts.the select lever is at the “P” or “N” position.or longer, turn the ignition switch to the (2) If this fails to start the engine, turn4. Turn the ignition switch to the “ON”“START” position without depressing the ignition switch back to the “OFF”position and check the operation of thethe accelerator pedal. position and wait for at least 10 warning and indicator lights. Refer to(4) If the engine still refuses to start, seconds. Then fully depress the accel-“Warning and indicator lights” F3-9.contact your nearest SUBARU dealer erator pedal and turn the ignition5. Turn the ignition switch to the “START”for assistance. switch to the “START” position. If theposition without depressing the accelera-6. Confirm that all warning and indicator engine starts, quickly release thetor pedal. Release the key immediatelylights have turned off after the engine has accelerator pedal. after the engine has started.started. The fuel injection system auto- (3) If this fails to start the engine, turn matically lowers the idle speed as the – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

owners manual Subaru Impreza

owners manual Subaru Impreza - year of production: 2011, 2012, 2013, 2014, 2015, 2016 - Subaru Impreza IV 4 owners manual EN