Mitsubishi Lancer VIII 8 owners manual page 284

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Manual air conditioning with MAX A/C mode (if so equipped) If the outside air is dusty or contaminated in When the setting has changed from dis- NOTE some way, use the recirculation position.abled to enabled, If outside air was selected: Switch to the outside air position every now the system will beep two times and the Outside air is continued indicator light will flash three times. and then to keep the windows from fogging up. Personalizing the air selection CAUTION (Changing the function setting) NOTE The factory setting is “Enable automatic air N00702100015 Using recirculated air for a long time may control”. cause the windows to fog up. You can change the following functions to While the mode selection dial is set between match your preference. “ ” and “ ” position, the air selection Enable automatic air control: will automatically change to the outside air NOTE 7 position, even if the system is set to “Disable When the air conditioning operates, the While the mode selection dial is set between automatic air control”, in order to prevent air selection switch will be automatically “ ” and “ ” position, the air condition- windows from fogging up. controlled. ing compressor will run automatically. The outside air position will also be selected Disable automatic air control: automatically. (In this case, the air condition- Air conditioning switch ing indicator will not change.) Even when the air conditioning operates, the air selection switch will not be auto-N00731000423 When the temperature control dial is set to matically controlled. Push the switch, and the air conditioning the “MAX A/C” position, the air selection will be automatically set to the recirculation compressor will turn on. The air conditioning position. Changing the settings indicator light (A) will come on. A sound will be made every time you push Press the air selection switch for about 10 When the temperature control dial is in the seconds or longer. the switch. “MAX A/C” position, if it is set to a position When the setting has changed, the system other than “MAX A/C”, the setting for the will beep and the indicator light will flash. air selection switch is selected as described below. The selection of recirculated air or When the setting has changed from outside air depends on the setting before enabled to disabled, “MAX A/C” was used. the system will beep three times and the If automatic control was set: indicator will flash three times. Automatic control is continued If recirculated air was selected: Recirculated air is continued Comfort controls 7-9

owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN