Mitsubishi Outlander PHEV III 3 owners manual page 284

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 47 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Bluetooth® 2.0 interface Enabling and disabling the voice Connecting the Bluetooth® 2.0 To pair model and retraining ® interface and Bluetooth device ® E00727600096 E00760601399 To pair a Bluetooth device with the Blue- You can turn a voice model registered withBefore you can make or receive hands-free ® the speaker enrollment function on and off tooth 2.0 interface, follow the steps below. whenever you want. calls or play music using the Bluetooth® 2.0 1.Stop your vehicle in a safe area, firmly You can also retrain the system. interface function, you must pair the Blue- apply the parking brake and push the elec- ® ® Use the following procedure to perform these tooth device and Bluetooth 2.0 interface. trical parking switch. actions. NOTE NOTE 1.Press the SPEECH button. zPairing is required only when the device is zYou cannot pair any Bluetooth® device with 2.Say “Voice training.” used for the first time. Once the device has ® 3.If you have completed a speaker enroll- ® the Bluetooth 2.0 interface unless the vehi-8 been paired with the Bluetooth 2.0 inter- ® ment process once already, the voice face, all you need is to bring the device into cle is parked. Before pairing a Bluetooth ® guide will say either “Enrollment is ena- the vehicle next time and the device will device with the Bluetooth 2.0 interface, bled. Would you like to disable or ® 2.0 interface auto- confirm that the vehicle is parked in a safe retrain?” or “Enrollment is disabled. connect to the Bluetooth location. matically (if supported by the device). The Would you like to enable or retrain?” ® 4.When enrollment is “enabled,” the voice device must have Bluetooth turned ON to 2.Press the SPEECH button. model is on; when enrollment is “disa- connect. 3.Say “Setup.” bled,” the voice model is off. Say the ® 4.Say “Pairing Options.” command that fits your needs. Up to 7 Bluetooth devices can be paired Say “Retrain” to start the speaker enroll- ® with the Bluetooth 2.0 interface. ment process and recreate a new voice ® model. (Refer to “Speaker enrollment” on If multiple paired Bluetooth devices are page 8-46.) available in the vehicle, the cellular phone or music player most recently connected is auto- matically connected to the Bluetooth® interface. 2.0 ® You can also change a Bluetooth device to be connected. For pleasant driving 8-47

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN