Infiniti QX56 QXII owners manual page 283

text version of content this owner's manual page from owners manual to the vehicle Infiniti QX56, year of production 2004 - 2010:

1. Move the selector lever into the P (Park)IGNITION SWITCHPOSITIONSCAUTION position. Push in the ignition switch to the B positionDonotleave the vehicle with the ignition 2. Turn the ignition switch slightly in the ONs direction. whenyouturnit. switch in ACC or ON positions when the LOCK(Normalparkingposition) A :engine is not running for an extended pe- 3. Turn the key toward the LOCK position. s riod. This can discharge the battery. TheselectorlevercanbemovedfromthePThe ignition switch can only be locked in theINFINITI VEHICLE IMMOBILIZER (Park) position if the ignition switch is inLOCKposition.SYSTEM theONpositionandthefootbrakepedalisThe ignition switch will be unlocked when it is depressed. pushed in, and turned to the ACC position CThe INFINITI Vehicle Immobilizer System will not s allowthe engine to start without the use of the There is an OFF position in between LOCK andwhile carrying the Intelligent Key.registered key. ACC, although it does not show on the lockACC(Accessories) C : cylinder. When the ignition is in OFF the steerings If the engine fails to start using the registered key, wheel is not locked. This position activates electrical accessoriesit may be due to interference caused by another In order for the steering wheel to be locked, itsuchastheradio,whentheengineisnotrunning.registered key, an automated toll road device or mustbeturnedabout1/6ofaturncounterclock-ON(Normaloperatingposition) D :automated payment device on the key ring. Re- s start the engine using the following procedures: wise from the straight up position.This position turns on the ignition system and the1. Leave the ignition switch in the ON position Tolockthesteeringwheel,turntheignitionelectrical accessories.for approximately 5 seconds. switch to the LOCK position. To unlock theSTART E : 2. Turn the ignition switch to the OFF or LOCK steering wheel, push the ignition switch ins position and wait approximately 5 seconds. and turn it gently while rotating the steer-This position starts the engine. As soon as the ing wheel slightly right and left.enginehasstarted,releasetheknobimmediately.3. Repeat step 1 and 2 again. If the battery of the vehicle equipped withIt will automatically return to the ON position.4. Restart the engine while holding the device the Intelligent Key system is discharged,Theignition switch cannot be turned back to the(which may have caused the interference) the ignition switch cannot be turned fromLOCKposition unless the selector lever is in theseparate from the registered key. the LOCK position, even using the me-P(Park)position. (It can be turned only to the BIf the no start condition re-occurs, INFINITI recom- chanical key. s mendsplacingtheregisteredkeyonaseparatekey position.) ring to avoid interference from other devices. Starting and driving 5-9 ZREVIEWCOPY—2008Infiniti QX56 (iwz) Owners Manual—USA_English (nna) 03/02/07—debbieX

owners manual Infiniti QX56

owners manual Infiniti QX56 - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Infiniti QX56 QXII owners manual EN