owners manual Volvo XC90

all ratings: 0 average rating: 5

DRIVER SUPPORT || The driver will then have to reactivate ACC inthe gear selector is moved to the P, N or R WARNING – • one of the following ways: positions If ACC changes targets from a moving vehicle the driver puts ACC in standby mode. • to a stationary one at speeds above 20 mph• Press the button on the left-side (30 km/h), the system will not react to thesteering wheel keypad. Automatically setting the parking brake stationary vehicle and will accelerate to thePress the accelerator pedal. previously set speed. • In certain situations, the parking brake is set The driver must actively apply the brakes to> ACC will resume following the vehicleautomatically to help keep the vehicle at a stand- slow/stop the vehicle. ahead (target vehicle) if it begins to movestill. within approx. 6 seconds. This occurs if ACC keeps the vehicle at a stand- Automatic standby mode when changing still with the brakes and: targets NOTE the driver unbuckles the seat belt or opens • ACC disengages and goes into standby mode if:ACC can keep the vehicle at a standstill forthe door up to 5 minutes, after which the parking brakeACC has kept the vehicle at a standstill for your vehicle€s speed goes below approx. • • will be set and ACC will go into standby 3 mph (5 km/h) and ACC cannot determinemode. more than approx. 5 minutes if the target object is a stationary vehicle or the brakes overheat The parking brake has to be released before• some other type of object such as a speed the engine is turned off. bump, etc ACC can be reactivated. • the vehicle€s speed goes below approx. Related information • 3 mph (5 km/h) and the vehicle aheadDeactivation of the auto-hold brake functionAdaptive Cruise Control (ACC)* (p. 271) • changes lanes or turns so that ACC noIn certain situations, auto-hold will be deactivatedAuto-hold brake function (p. 368) longer has a target vehicle to follow.when the vehicle is at a standstill and ACC will go• Parking brake (p. 371) into standby mode. • Auto-hold brake function In slow-moving, stop-and-go traffic or when stop-This means that the brakes will be released and ped at a traffic light, driving will resume automati-the vehicle can begin to roll. cally if the vehicle is not stopped for more thanThe driver must actively apply the brakes to keep approx. 3 seconds. If it takes more thanthe vehicle at a standstill. 3 seconds for the vehicle ahead to begin movingThis can occur in the following situations: again, ACC will go into standby mode and the auto-hold brake function will activate.the driver presses the brake pedal • the parking brake is set • 280 * Option/accessory, for more information, see Introduction.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders