Mitsubishi Lancer Sportback VIII 8 owners manual page 282

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer Sportback, year of production 2007 - 2016:

BK0151000US.book 189 ページ㧞㧜㧝㧞年㧟月㧞㧥日　木曜日　午後６時㧤分 Features and controls ●The initial (default) setting is “Auto reset mode”.Auto reset mode ●The display setting can be changed to the preferred units●When the average fuel consumption is being displayed, if (mph or km/h). you hold down the multi-information meter switch, these Refer to “Changing the function settings (With ignitioncalculations will be reset to zero. switch in the “ON” position)” on page 3-197. ●When the ignition switch has been set to the “ACC” or ●The average speed display memories for auto reset mode“LOCK” position for about 4 hours or more, the average and manual reset mode are erased if the battery is discon-speed display will automatically reset. nected. NOTE Average fuel consumption display ●The average speed display and the average fuel consump- This displays the average fuel consumption from the last resettion display can be reset separately in both auto reset to the present. mode and manual reset mode. There are 2 types of mode settings as follows. ●“---” is displayed when the average fuel consumption can- For details on how to change the average fuel consumption dis-not be measured. 3 play setting, refer to “Changing the function settings (With●The initial (default) setting is “Auto reset mode”. ignition switch in the “ON” position)” on page 3-197. ●Average fuel consumption may vary depend on the driv- The “ ” mark in the momentary fuel gauge shows the averageing conditions (road conditions, how you drive, etc.) The fuel consumption. (Type 2) actual fuel consumption may differ from the fuel con- Manual reset mode sumption displayed, so treat the fuel consumption dis- ●When the average fuel consumption is being displayed, ifplayed as just a rough guideline. you hold down the multi-information meter switch, the ● The average fuel consumption display memories for auto average fuel consumption displayed at that time is reset.reset mode and manual reset mode are erased if the battery ●When the ignition switch is turned to the “ON” positionis disconnected. from the “ACC” or “LOCK” position, the mode setting ● The display setting can be changed to the preferred units changes automatically from manual to auto. {mpg (US), mpg (UK), L/100 km or km/L}. Switching to auto occurs automatically. If switching toRefer to “Changing the function settings (With ignition manual mode is done, however, the data from the lastswitch in the “ON” position)” on page 3-197. reset is displayed. 3-189

owners manual Mitsubishi Lancer Sportback

owners manual Mitsubishi Lancer Sportback - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer Sportback VIII 8 owners manual EN