owners manual BMW X6M F16

all ratings: 0 average rating: 5

Seite 282 Mobility Replacing components Preparing wheel change Mounting a wheel 1. Observe the safety precautions above. 1. Unscrew the lug bolts and remove the wheel. 2. Loosen the lug bolts a half turn. 2. Remove accumulations of mud or dirt from Jacking up vehicle the mounting surfaces of the wheel and hub. Also clean the lug bolts. 1. Position the vehicle jack at the jacking point closest to the wheel so that the entire3.Position the new wheel or compact wheel. surface of the jack base rests on the Secure the wheel by screwing at least two ground perpendicularly beneath the jackѪ lug bolts into opposite bolt holes. ing point. When you mount wheels other than GenuѪ ine BMW light-alloy wheels, different lug The vehicle jack is designed for bolts may also be required. changing wheels only. 4. Screw in the remaining lug bolts. Tighten The vehicle jack is designed for changing all the bolts securely in a diagonal pattern. wheels only. Do not attempt to raise anѪ other vehicle model with it or to raise any5.Lower the vehicle and remove the jack load of any kind. To do so could cause acѪfrom beneath the vehicle. cidents and personal injury.◀ After mounting 1. Tighten the lug bolts in a diagonal pattern. Checking that the lug bolts are tight To ensure safety, always have the lug bolts checked with a calibrated torque wrench as soon as possible to ensure that they are tightened to the specified torque. Otherwise, incorrectly tightened lug bolts are a hidden safety risk. The tightening torѪ 2. Guide the jack head into the rectangular que equals 101 lb ft/140 Nm.◀ recess of the jacking point when cranking 2. Stow the defective wheel in the cargo area. up, refer to illustration detail. The defective wheel cannot be stored unѪ der the cargo floor cover due to its size. 3. Check and correct the tire inflation presѪ sure at the earliest opportunity. 4. Initialize the Flat Tire Monitor, refer to page 88, or reset the Tire Pressure MoniѪ tor, refer to page 90. 5. Replace the damaged tire as soon as posѪ sible and have the new wheel/tire balѪ anced. 3. Jack the vehicle up until the wheel you are changing is raised from the ground. 282 Online Edition for Part no. 01 40 2 910 899 - VII/13

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders