owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US 2010-05-20T09:17:30+02:00 - Seite 279 hereepe Version: 3.0.3.6 Tire pressures 279 iIf a spare wheel/emergency spare wheelchanged handling or load characteristics, for is mounted, the system may continue toexample). The TPMS then monitors the new show the tire pressure of the wheel that hastire pressure values. been removed for a few minutes. If this Restart the tire pressure monitor after you occurs, note that the value displayed for have set the tire pressure to the value the position where the spare wheel is recommended for the desired driving mounted is not the same as the spare situation (Y page 272). Only correct tire wheel/emergency spare wheel's current pressures on cold tires. Comply with the tire pressure. recommended tire pressures on the Tire and Loading Information placard on the B-pillar on TPMS warning messages the driver's side Additional tire pressure values for driving at high speeds or with heavy If the tire pressure monitor detects a loads can be found in the Tire Pressure table significant pressure loss on one or more tires, on the inside of the fuel filler flap. a warning message is shown in the XMake sure that the tire pressure is correct multifunction display. A warning tone also on all four wheels. sounds and the tire pressure warning lamp lights up in the instrument cluster.XMake sure that the SmartKey is in position 2 in the ignition lock. Each tire that is affected by a significant loss of pressure is highlighted by a red rectangle.XPress the = or ; button to select the If the Correct Tire Pressure messageService menu. appears in the multifunction display:XPress the 9 or : button to select X Tire Pressure. Check the tire pressure on all four wheels and correct it if necessary. XPress the a button. The current tire pressure of each wheel or iIf the wheel positions on the vehicle are the Tire pressures will be interchanged, the tire pressures may be displayed after driving a few displayed for the wrong positions for a Tires and wheels minutes message is shown in the short time. This is rectified after a few multifunction display. minutes of driving, and the tire pressures XPress the : button. are displayed for the correct positions. The Use Current Pressures as New Reference Values message appears in Restarting the tire pressure monitor the multifunction display. GWarning If you wish to confirm the restart: It is the driver's responsibility to set the tire XPress the a button. inflation pressure to the recommended cold The Tire Press. Monitor Restarted tire inflation pressure. Underinflated tires message appears in the multifunction affect the ability to steer or brake the vehicle. display. You might lose control over the vehicle. After driving for a few minutes, the system When you restart the tire pressure monitor,checks whether the current tire pressures all existing warning messages are deleted andare within the specified range. The new tire the warning lamps go out. The monitor usespressures are then accepted as reference the currently set tire pressures as thevalues and monitored. reference values for monitoring. The TPMS must be restarted when you set the tire pressure to a new value (as a result of Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders