owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 27 Friday, April 9, 2010 2:24 PM Instruments and warning lights 27 On vehicles with rain sensor you can switch on or off the swivel function is deactivated when switching on this mode. Further information function for automatic closing of the windows and the page56. Rain closing sliding/tilting roof in case of rain and locked vehicle. If it is Time not raining and the function is set, the windows including Here you can set the time, the time format (12 or 24 hour indicator) and the time the sliding/tilting roof are closed automatically after change summer/winter time. approx. 12 hours. Door open Here you can switch on or off the functions for opening a Winter tyres single door and automatic closing. Here you can set at which speed a warning signal should sound. This function is used Here you can set if a signal tone should sound additionally for e.g winter tyres with the permissible maximum speed less than the maximum ATA confirm when activating or deactivating the anti-theft alarm system speed of the vehicle. . When exceeding the speed, the following is displayed on the information display*: Window op. Here you can set the convenience mode only for the driver Winter tyres:max. speed.km/h window or for all the windows. Measures Mirror down Here you can switch on or off the function for mirror low-Here you can set the units for temperature, consumption and distance driven. ering on the front passenger side when engaging the reverse gear a). Assistant Mirror adjust. Here you can switch on or off the function for left and right Here you can adjust the tones of the acoustic signals of the parking aid*. exterior mirror adjustment simultaneously. Second speed After selecting this menu the convenience setting is reset Here you can switch on the display of the second speed in mph or in km/h2). Factory setting to factory setting. The following is displayed in the infor- mation display: Service Convenience factory settings restored Here you can have the kilometers still to be driven and the days until the following service interval shown and the Service Interval Display reset. a) This function is only available on vehicles with an electrically adjustable driver seat.Factory Setting Lights and Visibility After selecting the menu Factory Setting the factory setting of the information display Here you can set how long the light should stay on for the function Coming/Leaving is established again. Home. Furthermore you can here switch on or off the functions daylight driving lights and convenience turn signal. After selecting the menu Factory setting the factory setting is established again. After selecting the menu point travel mode, you can activate / deactivate the mode “tourist light”. This mode makes it possible to drive in countries with opposing traffic system, driving on the left/right, without dazzling the oncoming vehicles. The headlight 2)Valid for countries where the values are indicated in British measuring units. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders