owners manual Nissan 350Z

all ratings: 0 average rating: 5

no more than 1/16″ smaller than the hole in Safety chains the ball mount. trailer hitch.
To reduce the possibility of addi-Always use a suitable chain between a vehicle
The threaded shank of the hitch ball must be and the trailer. The safety chain should be long enough to be properly secured to thetional damage if a vehicle is struckcrossed and should be attached to the hitch, not ball mount. There should be at least 2 threadsfrom the rear, where practical, re-to the vehicle bumper or axle. Be sure to leave showing beyond the lock washer and nut.movethehitch and/or receiver whenenough slack in the chain to permit turning Class I hitch not in use. corners. Class I trailer hitch equipment (receiver, ball
After the hitch is removed, seal theTrailer lights mountandhitch ball) can be used to tow trailersbolt holes to prevent exhaust fumes, of a maximum weight of 2,000 lb(909 kg).water or dust from entering the pas-CAUTION senger compartment. You may add Class I trailer hitch equipment to
Regularly check that all trailer hitch the vehicle that has a 2,000 lb(909 kg) maxi- Whensplicing into the vehicle electrical mum weight rating, but your vehicle is onlymountingboltsaresecurelymounted.system,acommerciallyavailable capable of towing the maximum trailer weights power-type module/converter must be shown in the Towing Load/Specification ChartTire pressuresused to provide power for all trailer earlier in this section. lighting. This unit uses the vehicle bat-
When towing a trailer, inflate the ve-tery as a direct power source for all CAUTION hicle tires to the recommended coldtrailer lights while using the vehicle tail tire pressure indicated on the Tire andlight, stoplight and turn signal circuits
Donot use axle-mounted hitches.Loading Information label.as a signal source. The module/
The hitch should not be attached to
Trailer tire condition, size, load ratingconverter must draw no more than 15 or affect the operation of the impact- milliamps from the stop and tail lamp and proper inflation pressure shouldcircuits. Using a module/converter that absorbing bumper. be in accordance with the trailer andexceeds these power requirements may
Do not modify the vehicle exhausttire manufacturers’ specifications.damage the vehicle’s electrical system. system,brakesystem,etc.toinstalla See a reputable trailer dealer to obtain 9-20 Technical and consumer information
05.10.18/Z33-D/V5.0 

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders