owners manual Peugeot Traveller

all ratings: 0 average rating: 5

Practical information Oil grade Engine oil change Coolant level Before topping-up the oil or changing the oil, Refer to the manufacturer's service schedule check that the oil is the correct grade for your for details of the interval for this operation.The coolant level should be close engine and conforms to the manufacturer's In order to maintain the reliability of the engine to the "MAX" mark but should never recommendations. and emission control system, never use exceed it. additives in the engine oil. When the engine is warm, the temperature of the coolant is regulated by the fan. Topping-up the engine oil levelBrake fluid level The cooling fan may start after switching The location of the oil filler cap is shown in the The brake fluid level should be close off the engine: take care with articles and corresponding underbonnet layout view.to the "MAX" mark. If it is not, check clothing that might be caught by the fan F unscrew the oil filler cap to reveal the filler the brake pad wear.blades. aperture. F Add oil in small quantities, avoiding any In addition, as the cooling system is pressurised, spills on engine components (risk of fire).Changing the luidwait at least one hour after switching off the F Wait a few minutes before checking the Refer to the manufacturer's service schedule engine before carrying out any work. level again using the dipstick.for details of the interval for this operation.To avoid any risk of scalding, unscrew the cap F Add more oil if necessary. by two turns to allow the pressure to drop. When F After checking the level, carefully refit the the pressure has dropped, remove the cap and oil filler cap and the dipstick in its tube.Fluid speciicationtop up the level. The brake fluid must conform to the manufacturer's recommendations.Check the coolant level regularly, according to the use made of your vehicle (every Power steering 3 000 miles or 5 000 kms / 3 months); if After topping-up the oil, the check when fluid level necessary, top-up using coolant recommended switching on the ignition with the oil by the manufacturer. level indicator in the instrument panel The power steering fluid level should Topping-up the coolant between services is is not valid during the 30 minutes after be close to the "MAX" mark. With normal. topping up. the engine cold, unscrew the cap to check the level. 274 Traveller-VP_en_Chap07_info-pratiques_ed01-2016

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders