or
owners manual Volvo XC70
owners manual Volvo XC70 - year of production: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 - Volvo XC70 Cross Country 2007 owners manual EN
Document:
pdf (10.49 MB) 283 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Volvo XC70, year of production 1999 - 2007:
2007 Volvo XC70
Determining if your garage door uses a rolling code
Determine, in one of the following ways, if your garage door uses a rolling code system and is
manufactured after 1996:
● Refer to the garage door opener owner's manual for verification.
● If your hand-held transmitter appears to program the HomeLink® Universal Transceiver but the
programmed button does not activate the garage door, your garage door opener may have a rolling code.
● Press the programmed HomeLink® button. If the garage door opener has the rolling code feature, the
HomeLink® indicator light flashes rapidly and then glows steadily after approximately 2 seconds.
To train a rolling code garage door opener, follow these instructions after programming the desired
transceiver button according to "Programming the transceiver." The help of a second person may make
training easier.
- Locate the training button on the garage door opener motor head unit. The location and color of the
training button may vary. If you encounter difficulty, refer to the garage door opener owner's manual or
call toll-free 1-800-355-3515 (Internet: www.HomeLink.com).
- Press the "training" button on the garage door opener motor head unit until the "training" light comes
on.
- Press and release the programmed HomeLink® button. Press and release the programmed HomeLink®
button a second time to complete the training process.
Some garage door openers may require you to do this procedure a third time to complete the training.
The programmed button on your HomeLink® Universal Transceiver should now operate your garage
door opener. The original handheld transmitter can also be used, as desired, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way. In the event of any
problems in programming the HomeLink® Universal Transceiver, call toll-free 1-800-355-3515
(Internet: www.HomeLink.com).
pg. 245 Audio
HomeLink® Universal Transceiver (option)
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in place of your hand-held
transmitters.
To operate, the key must be turned to the "accessory" position (II) or the engine must be running. Press
the programmed HomeLink® button to activate the garage door, driveway gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any time.
Erasing programmed buttons
file:///K|/ownersdocs/2007/2007_XC70/07xc70_11.htm (21 of 22)12/30/2006 5:51:47 PM
Download PDF
Click here to download a pdf file with an instruction manual for Volvo XC70
year of production from: 1999
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Volvo XC70 Cross Country 2007 owners manual
pages 270 - 276
Volvo XC70 Cross Country 2007 owners manual
page 273 / 283
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Other available language versions of this manual:
Volvo XC70 Cross Country I 1 Handbuch DE
show the owner's manual
pdf - 8.49 MB