owners manual Seat Leon

all ratings: 0 average rating: 5

268 Wheels and tyres To ensure that the wear is equal on all tyres the wheels should be changedA knowledge of tyre designations makes it easier to choose the correct round from time to time according to the system ⇒ Fig. 162. The useful lifetyres. The following wording can be read on the sides of the tyre:  of all the tyres will then be about the same time. 205/55 R16 91V This contains the following information: Replacing wheels and tyres 205 Tyre width in mm 55 Height/width ratio in % It is important to use the correct wheels and tyres when re- R Tyre construction: Radial placement is necessary. 16 Rim diameter in inches – All four wheels must be fitted with tyres of the same type, size 91 Load rating code (rolling circumference) and preferably the same tread pattern. V Speed index – Tyres should be replaced at least in pairs and not individually The manufacturing date is also indicated on the tyre sidewall (possibly only (i.e. both front tyres or both rear tyres together). on the inner side of the wheel): DOT. 2212. – Do not use tyres whose effective size exceeds the dimensions of the factory-approved makes of tyre. means that the tyre was produced in the 22nd week of 2012. – If you wish to fit the vehicle with rims or tyres that are different Please note that with some types of tyre, the actual tyre size can differ from to those installed in manufacture, it is advisable to consult a the nominal size marked on the tyre (for instance 205/55 R 16 91 W), and SEAT Official Service before purchasing them. there may be significant differences in the contours of the tyres, even though the tyres are marked with the same nominal size designation. The tyres and wheel rims are an essential part of the vehicle's design. TheWhen replacing the tyres, it is therefore important to make sure that the tyres and rims approved by SEAT are specially matched to the characteris-actual size of the new tyres does not exceed the dimensions of the factory- tics of the vehicle and make a major contribution to good roadholding andapproved makes of tyre. safe handling ⇒  . Failure to observe this requirement can affect the clearance needed for the The sizes of the rims and tyres approved for your vehicle are listed in thetyres. This could result in contact between the tyres and suspension com- vehicle documentation (e.g. EC Certificate of Conformity or COC docu- ponents or bodywork causing damage. The brake lines could also be dam- 1) ment ). The vehicle documentation varies depending on the country of resi-aged and vehicle safety could be severely impaired ⇒ .  dence. 1) COC = certificate of conformity

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders