manual Lexus ES300h VI 6 XV60 owners manual page 268

text version of content this owner's manual page from owners manual to the vehicle Lexus ES300h, year of production 2012:

268 4-5. Using the driving support systems ■The Blind Spot Monitor function is operational when ●The BSM main switch is set to on ●Vehicle speed is greater than approximately 10 mph (16 km/h). ■The Blind Spot Monitor function will detect a vehicle when ●A vehicle in an adjacent lane overtakes your vehicle. ●Another vehicle enters the detection area when it changes lanes. ■Conditions under which the Blind Spot Monitor function will not detect a vehicle The Blind Spot Monitor function is not designed to detect the following types of vehicles and/or objects: ●Small motorcycles, bicycles, pedestrians etc.* ●Vehicles traveling in the opposite direction ●Guardrails, walls, signs, parked vehicles and similar stationary objects* ●Following vehicles that are in the same lane* ●Vehicles driving 2 lanes across from your vehicle* *: Depending on conditions, detection of a vehicle and/or object may occur. ■Conditions under which the Blind Spot Monitor function may not function correctly ●The Blind Spot Monitor function may not detect vehicles correctly in the following con- ditions: During bad weather such as heavy rain, fog, snow etc. When ice or mud etc. is attached to the rear bumper When driving on a road surface that is wet due to rain, standing water etc. When there is a significant difference in speed between your vehicle and the vehicle that enters the detection area When a vehicle is in the detection areafrom a stop and remains in the detection area as your vehicle accelerates When driving up or down consecutive steep inclines, such as hills, a dip in the road etc. When multiple vehicles approach with only a small gap between each vehicle When vehicle lanes are wide, and the vehicle in the next lane is too far away from your vehicle When the vehicle that enters the detection area is traveling at about the same speed as your vehicle When there is a significant difference in height between your vehicle and the vehicle that enters the detection area Directly after the BSM main switch is set to on When items such as a bicycle carrier are installed on the rear of the vehicle ●Instances of the Blind Spot Monitor function unnecessarily detecting a vehicle and/or object may increase under the following conditions: When there is only a short distance between your vehicle and a guardrail, wall etc. When there is only a short distance between your vehicle and a following vehicle When vehicle lanes are narrow and a vehicle driving 2 lanes across from your vehi- cle enters the detection area When items such as a bicycle carrier are installed on the rear of the vehicle ES300h_OM_OM33B71U_(U)

owners manual Lexus ES300h

owners manual Lexus ES300h - year of production: 2012 - Lexus ES300h VI 6 XV60 owners manual EN