owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US2010-05-20T09:17:30+02:00 - Seite 266 hereepe Version: 3.0.3.6 266 Fuses XDepress and hold the brake pedal. Transporting the vehicle XTurn the SmartKey to position 2 in the The towing eye can be used to pull the vehicle ignition lock. onto a trailer or transporter for transporting XDepress and hold the clutch pedal. purposes. XShift to neutral. XVehicles with manual transmission: XRelease the brake pedal. shift to neutral. XShift to second gear. XVehicles with automatic transmission: turn the SmartKey to position 2 in theXTow-start the vehicle. ignition lock. XRelease the clutch pedal slowly and do not XShift the selector lever to N. depress the accelerator pedal when doing so. As soon as the vehicle has been loaded: The engine is started. XPrevent the vehicle from rolling away by XDepress the clutch pedal and shift to applying the parking brake. neutral. XVehicles with manual transmission: XEngage the parking brake. shift to first gear or reverse gear. XStop the vehicle in a suitable location to XVehicles with automatic transmission: remove the tow bar or the tow rope. move the selector lever to P. XRemove the towing eye (Y page 265). XTurn the SmartKey to position 0 in the XSwitch off the hazard warning lamps. ignition lock and remove the SmartKey. XSecure the vehicle. Fuses ! Only lash the vehicle down by the wheels Breakdown assistanceor wheel rims, not by parts of the vehicle Important safety notes such as axle or steering components. Otherwise, the vehicle could be damaged.The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions Tow-starting (emergency engine will fail. starting) GWarning When tow-starting, observe the important Only use fuses approved by Mercedes-Benz safety notes (Y page 264). with the specified amperage for the system in question and do not attempt to repair or ! Vehicles with an automatic transmission bridge a blown fuse. Using other than must not be tow-started. You could approved fuses or using repaired or bridged otherwise damage the automatic fuses may cause an overload leading to a fire, transmission. and/or cause damage to electrical Before tow-starting: components and/or systems. Have the cause R determined and remedied by an authorized the battery must be connected Mercedes-Benz Center. R the engine must be cold R the catalytic converter must be cold Blown fuses must be replaced with fuses of XSwitch on the hazard warning the same rating, which you can recognize by lamps(Y page 109). the color and value. The fuse ratings are listed XInstall the towing eye (Y page 264).in the fuse allocation chart. An authorized

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders