owners manual KIA Rio

all ratings: 0 average rating: 5

Maintenance Waxing Finish damage repair Underbody maintenance Wax the vehicle when water will no longer bead on the paint. Deep scratches or stone chips in theCorrosive materials used for ice and painted surface must be repairedsnow removal and dust control may col- Always wash and dry the vehicle before promptly. Exposed metal will quickly rustlect on the underbody. If these materials waxing. Use a good quality liquid or paste wax, and follow the manufacturer’sand may develop into a major repairare not removed, accelerated rusting can instructions. Wax all metal trim to protect expense.occur on underbody parts such as the it and to maintain its luster. fuel lines, frame, floor pan and exhaust ✽✽ NOTICE system, even though they have been Removing oil, tar, and similar materials treated with rust protection. If your vehicle is damaged and requires with a spot remover will usually strip the Thoroughly flush the vehicle underbody any metal repairorreplacement, be sure wax from the finish. Be sure to re-wax and wheel openings with lukewarm or these areas even if the rest of the vehiclethe body shop applies anti-corrosion cold water once a month, after off-road does not yet need waxing. materials to the parts repaired or replaced. driving and at the end of each winter. Pay special attention to these areas because ✽✽ NOTICE Bright-metal maintenance it is difficult to see all the mud and dirt. It • Wiping dust or dirt off the body with will do more harm than good to wet down • To remove road tar and insects, use a a dry cloth will scratch the finish. the road grime without removing it. The tar remover, not a scraper or other • Do not use steel wool, abrasive clean- lower edges of doors, rocker panels, and sharp object. frame members have drain holes that ers, or strong detergents containing should not be allowed to clog with dirt; • To protect the surfaces of bright-metal highly alkaline or caustic agents on trapped water in these areas can cause chrome-plated or anodized aluminumparts from corrosion, apply a coating of wax or chrome preservative and rub torusting. parts. This may result in damage to a high luster. the protective coating and cause dis- coloration or paint deterioration. • During winter weather or in coastal areas, cover the bright metal parts withWARNING After washing the vehicle, test the a heavier coating of wax or preserva- brakes while driving slowly to see if tive. If necessary, coat the parts with they have been affected by water. If non-corrosive petroleum jelly or other protective compound. braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow for- ward speed. 7 48

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders