owners manual Hyundai Veloster

all ratings: 0 average rating: 5

What to do in an emergency 10.To reinstall the wheel, hold it on WARNING the studs, put the wheel nuts on the studs and tighten them finger • Wheels may have sharp edges. Handle them carefullytight.Jiggle the tire to be sure it is completely seated, then tighten to avoid possible severe injury. the nuts as much as possible with your fingers again. • Before putting the wheel into 11. Lower the vehicle to the ground place, be sure that there is by turning the wheel nut wrench nothing on the hub or wheel (such as mud,tar, gravel, etc.) counterclockwise. that interferes with the wheel from fitting solidly against the OFS060013 hub. If there is, remove it. If Then position the wrench as shown the contact of the mounting in the drawing and tighten the wheel surface between the wheel nuts.Be sure the socket is seated and hub is not good,the wheel nuts could come loose completely over the nut.Do not stand and cause the loss of a wheel. on the wrench handle or use an Loss of a wheel may result in extension pipe over the wrench han- loss of control of the vehicle. dle. Go around the wheel tightening This may cause serious injury every nut following the numerical or death. sequence shown in the image until they are all tight.Then double-check each nut for tightness.After changing wheels, we recommend that the sys- tem be checked by an authorized HYUNDAI dealer. 613

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders