owners manual Subaru Outback

all ratings: 0 average rating: 5

7-20 Starting and operating !While climbing a grade . Automatic downshifts to 3rd or 2ndhas become impossible, turn the ignition Whendrivingupahill,undesiredupshifttomayoccurevenwhendrivingonalevelswitch back to the “ON” position then 4th gear is prevented from taking placeroad depending on conditions, such asmovetheselector lever to the “P” position. when the accelerator is released. Thishowhardyoudepressthebrakepedal.Pressing the selector lever release button minimizes the chance of subsequent alsomakesitpossibletomovethe downshifting to a lower gear when accel-&Selector lever reverse inhi-selector lever to the “P” position at this erating again. This prevents repeatedbiting functiontime. upshifting and downshifting resulting in aThis function prevents accidental move-! Selector lever release button smoother operation of the vehicle.ment of the selector lever to the “R” NOTE position while the vehicle is moving. Thetransmissionmaydownshiftto2ndThe function becomes operational when or 1st gear, depending on the way thethe vehicle reaches a speed of approxi- accelerator pedal is pressed to accel-mately 6 mph (10 km/h). Once opera- erate the vehicle again. tional, it prevents the selector lever from being moved from the “N” position to the !While going down a hill “R” position. When the vehicle speed When you are descending a hill or anydrops below 6 mph (10 km/h), the function is canceled. The selector lever can then other slope while braking with the “SPORT”modeselected,thetransmissionbe moved to the “R” and “P” positions. maydownshift to 3rd or 2nd gear depend-When the ignition switch has been turned ing on how hard you depress the braketo the “LOCK” position, movement of theIf you inadvertently have turned the igni- pedal, causing engine braking to work.selector lever from the “N” position to thetion switch to the “LOCK” position with the Reacceleration for a short time will cause“R” position is possible for a limited timeselector lever in the “N” position, proceed the transmission to upshift normally.period by depressing the brake pedal andas follows. By referring to the “Shift lock NOTE then becomes impossible. Also, the se-release” section in this chapter, remove lector lever cannot be moved to the “R”the shift lock release cover. Then, with the . A 4th-to-3rd automatic downshift position after it has been placed in the “P”screwdriver inserted into the hole, move will not occur at speeds above 50position and then placed again in the “N”the selector lever to the “P” position. If the mph (80 km/h) and a 3rd-to-2nd auto-position. selector lever reverse inhibiting function matic downshift will not occur at When the movement of the selector leverfails, have the vehicle inspected by the speeds above 24 mph (38 km/h).from the “N” position to the “R” positionnearest SUBARU dealer.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders