owners manual Mazda MX-5

owners manual Mazda MX-5 - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Mazda MX 5 Miata NC III 3 owners manual EN

Document: pdf (8.17 MB) 446 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mazda MX-5, year of production 2005 - 2014:

MX-5_8AV1-EA-09F_Edition2 Page260 Thursday, July 30 2009 2:45 PM Black plate (260,1) Interior Comfort AudioSystem NOTE 4. Input the registered ID code using Master code: channel preset buttons 1-4. The Master Code is used to initialize or re- Example: When the registered ID code initialize the ID code in the event that the code is “2323”, input “2323”. At this time is not set to [0000] and/or the personalized ID “SR12323”isdisplayed. code is not known. The initialization process Press 1 for the first digit, 2 for the resets the ID code to [0000]. The master code second, 3 for the third, and 4 for the can potentially defeat the intent of the security last digit. For example, if your number of the parental lock if it is located by persons is 2323, press 1 three times (includes not authorized by the owner to access certain 0), 2 four times, 3 three times, and 4 channels. four times. If the display goes off while inputting, begin from Step 1. SIRIUS Satellite Radio Master Code: [0913] NOTE NOTE The registered ID code is the default [0000] at l Whenanumericvalueotherthanthe the time of factory shipment. If [0000] results mastercode is input and the scan button is in “Err” on the display, go to the pressed, “SR1 Err” is displayed and then it “INITIALIZATIONOFIDCODE”sectionto returns to the “SR1----” display again. reset to [0000]. l If an ID code is not input for ten seconds, (Verification with the registered ID “Err” is displayed and it returns to the code) formerdisplay. l Channel preset buttons 1, 2, 3, 4 and the 5. Determine the input code by pressing scan button are used for inputting the ID the scan button. code. Buttons 5 and 6 cannot be used. 6. If it does not match with the previously ChangeofIDcode registered code, “SR1 Err” is displayed Setting condition: SAT mode and then it returns to “SR1 - - - -”. WhenchangingtheIDcode,thenewID 7. If it matches with the previously code is input after the previous one is registered code, “ENTER PIN” appears input first. again and it switches to code input mode. (Registered ID code input) 8. “SR1 - - - -” appears, and it is ready for 1. Press and hold the scan button, then input of the new ID code. press channel preset button 5. Hold (NewIDcodeinput) both buttons together for 1.5 seconds. 2. “ENTERPIN”appearsfor three 9. Input the new ID code using channel seconds which indicates that it is in preset buttons 1-4. code input mode. Example: If “1234” is input as the new code, “SR11234” is displayed. 3. “SR1 - - - -” appears, which indicates that it is ready for code input. 6-42 Form No.8AV1-EA-09F

Download PDF

Click here to download a pdf file with an instruction manual for Mazda MX-5
year of production from: 2005

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.