owners manual Subaru Tribeca

all ratings: 0 average rating: 5

Starting and operating7-15 the “P” position to any other positionshifted from “N” to “R” or “P”: before the brake pedal is depressed. Within 60 seconds after placing the igni- Depress the brake pedal first, and thention switch in the “Acc” position, move the operate the select lever. select lever to the “R” or “P” position with . Only the “P” position allows you to turnthe select lever button pressed and brake the key from the “Acc” position to thepedal depressed. “LOCK” position and remove the key from the ignition key cylinder. If you must perform the above procedure, . If the ignition switch is turned to thethe shift lock system (or the vehicle control “LOCK”position while the select lever is insystem) may be malfunctioning. Contact a the “N” position, the select lever may notSUBARUdealerforaninspection assoon bemovedtothe“P”position after a periodas possible. of time. Therefore, move the select leverIfthe select lever does not move after to the “P” position with the brake pedalperforming the above procedure, refer to2. Remove the cover by prying on the depressed soon after the ignition switch is“Shift lock release using the shift lockedge with a flat-head screwdriver. turned to the “LOCK” position.release button” F7-15. NOTE ! Shift lock release ! Shift lock release using the shiftTo prevent damage to the cover, wrap lock release button the tip of the flat-head screwdriver with If the select lever cannot be operated, turnPerformthefollowingproceduretoreleasevinyl tape or a cloth before removing the ignition switch back to the“ON”the shift lock. the cover. position then move the select lever to the1. Apply the parking brake and stop the “P” position with the select lever buttonengine. pressed and brake pedal depressed. Ifthe select lever does not move after performing the above procedure, perform the following steps. . When the select lever cannot be shifted from “P” to “N”: Refer to “Shift lock release using the shift lock release button” F7-15. . When the select lever cannot be – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders